Table of Contents
Advertisement
Table 19. Dell EMC PowerEdge T340 system USB port specifications
Front panel
•
One iDRAC USB MGMT port (USB
2.0)
NOTE:
The micro USB 2.0
compliant port can only be
used as an iDRAC Direct or a
management port.
NIC ports specifications
The Dell EMC PowerEdge T340 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports that are located
on the back panel.
Serial connector specifications
The Dell EMC PowerEdge T340 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant.
VGA ports specification
The Dell EMC PowerEdge T340 system supports one 15-pin VGA port, on the back of the system.
IDSDM module
The Dell EMC PowerEdge T340 system supports optional Internal Dual SD module (IDSDM) module.
The module supports three microSD cards; two cards for IDSDM and one card for vFlash. In 14
IDSDM or vFlash module is combined into a single card module, and is available in the following configurations:
•
vFlash or
•
vFlash and IDSDM
Table 20. Supported microSD card storage capacity
IDSDM card
•
16 GB
•
32 GB
•
64 GB
NOTE:
There are two dip switches on the IDSDM or vFlash module for write-protection.
NOTE:
One IDSDM card slot is dedicated for redundancy.
NOTE:
Use Dell EMC branded microSD cards that are associated with the IDSDM or vFlash configured systems.
Video specifications
The Dell EMC PowerEdge T340 system supports Matrox G200eR2 graphics card with 16 MB capacity.
Table 21. Supported video resolution options
Resolution
640x480
Back panel
•
Four USB 2.0-compliant ports
vFlash card
•
Refresh rate
60, 70
Internal USB
th
generation of PowerEdge servers, the
16 GB
Color depth (bits)
8, 16, 24
Technical specifications
113
Advertisement
Table of Contents
