Installing The Cooling Fan Assembly - Dell PowerEdge R740xd Installation And Service Manual

Steps
1 Lift the release levers to unlock the cooling fan assembly from the system.
2 Hold the release levers, and lift the cooling fan assembly away from the system.
Figure 27. Removing the cooling fan assembly
Next step
Install the cooling fan assembly.
Related link

Installing the cooling fan assembly

Installing the cooling fan assembly
Prerequisite
Follow the safety guidelines listed in
CAUTION: Ensure that the cables inside the system are correctly installed and retained by the cable retention bracket before
installing the cooling fan assembly. Incorrectly installed cables may get damaged.
Steps
1 Align the guide rails on the cooling fan assembly with the standoffs on the system.
2 Lower the cooling fan assembly into the system until the cooling fan connectors engage with the connectors on the system board.
3 Press the release levers to lock the cooling fan assembly into the system.
Safety instructions.
Installing and removing system components 77