Table of Contents
Advertisement
Figure 86. Installing riser 3 blank
Next step
Follow the procedure listed in
Removing expansion card riser 1
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
If installed, remove the expansion cards from the riser.
4
Disconnect any cables connected to the riser.
Step
Press the release latches, and lift the riser from the riser connector on the system board.
138
Installing and removing system components
After working inside your
system.
Safety
instructions.
Before working inside your
system.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerEdge R740xd and is the answer not in the manual?