Table of Contents
Advertisement
Removing an expansion card riser
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Before removing the expansion card riser 2A, remove the expansion card from the riser, if installed.
4
Disconnect any cables connected to the expansion card.
Step
Hold the touch points, and lift the expansion card riser, from the riser connector, on the system board.
NOTE:
While removing the riser 1B, press the tabs and hold the touch point to lift the expansion card riser from the
system board.
Figure 46. Removing the expansion riser 1B
106
Installing and removing system components
Safety
instructions.
Before working inside your
system.
Advertisement
Table of Contents
