Hik-Connect Setup; Adding Camera To Hik-Connect - HIKVISION UD04310B Quick Start Manual

Network bullet camera
Table of Contents

Advertisement

Network Bullet Camera·Quick Start Guide

Hik-Connect Setup

5.2
Steps:
1. Download and install the Hik-Connect app by searching
"Hik-Connect" in App Store or Google Play
2. Launch the app and register for a Hik-Connect user account.
3. Log in Hik-Connect app after registration.

Adding Camera to Hik-Connect

5.3
Before you start:
You need to enable the Hik-Connect service on camera before
adding it to your Hik-Connect account. Refer to Chapter 5.1.
Steps:
1. Use a network cable to connect the camera with a router if the
camera does not support Wi-Fi.
Note:
After the camera connects to the network, please wait one minute
before any operation on the camera using Hik-Connect app.
2. In the Hik-Connect app, tap "+" on the upper-right corner and
then scan the QR code of the camera to add the camera.
Figure 5-3 Connect a Router
35
TM
.

Advertisement

Table of Contents
loading

Table of Contents