HEIDENHAIN TNC 640 User Manual page 901

Tables and Overviews | Technical Information
Input formats and units of control functions
Positions, coordinates, circle radii, chamfer
lengths
Tool numbers
Tool names
Detail values for tool compensation
Spindle speeds
Feed rates
Dwell time in Cycle 9
Thread pitch in various cycles
Angle for spindle orientation
Angle for polar coordinates, rotation, tilting
the working plane
Polar coordination for screw line interpolation
(CP)
Datum numbers in Cycle 7
Scaling factor in Cycles 11 and 26
Miscellaneous functions M
Q parameter numbers
Q parameter values
Surface-normal vectors N and T with 3-D
compensation
Labels (LBL) for program jumps
Labels (LBL) for program jumps
Number of program section repeats REP
Error number in Q parameter function FN14
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
–99 999.9999 to +99 999.9999
(5,4: number of digits before and after the decimal point)
[mm]
0 to 32 767 .9 (5, 1)
32 characters, enclosed by quotation marks with TOOL
CALL. Permitted special characters: # $ % & . , - _
–99.9999 to +99.9999 (2, 4) [mm]
0 to 99 999.999 (5, 3) [rpm]
0 to 99,999.999 (5, 3) [mm/min] or [mm/tooth] or [mm/1]
0 to 3600.000 (4, 3) [s]
-9.9999 to +9.9999 (2, 4) [mm]
0 to 360.0000 (3, 4) [°]
-360.0000 to 360.0000 (3, 4) [°]
–5 400.0000 to 5 400.0000 (4, 4) [°]
0 to 2999 (4, 0)
0.000001 to 99.999999 (2, 6)
0 to 999 (4, 0)
0 to 1999 (4, 0)
–99 999.9999 to +99 999.9999 (9, 6)
–9.99999999 to +9.99999999 (1, 8)
0 to 999 (5, 0)
Any text string in quotation marks ("")
1 to 65 534 (5, 0)
0 to 1199 (4, 0)
21
901