HEIDENHAIN TNC 640 User Manual page 275

Tools | Tool management (option number 93)
Deleting marked tool data
Using this function you can simply delete tool data that you no
longer need.
Follow the steps outlined below for deleting:
In the tool management you use the arrow keys or mouse to
mark the tool data that you wish to delete
Press the DELETE MARKED TOOLS soft key
The control shows a pop-up window listing the tool data to be
deleted.
Press the START soft key to start the deletion procedure
The control shows a pop-up window with the deletion status.
Terminate the delete process by pressing the END key or soft
key
Caution: Data may be lost!
The DELETE MARKED TOOLS function permanently deletes the
tool data. The data is not automatically backed up by the control,
e.g. to a recycle bin, before being deleted. The data is irreversibly
deleted by this function.
Regularly back up important data to external drives
The tool data of tools still stored in the pocket table
cannot be deleted. The tools must be removed from the
magazine first.
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
NOTICE
6
275