HEIDENHAIN TNC 640 User Manual page 103

Introduction | Status displays
Global Program Settings (POS HR tab, option 44)
The control displays this tab only if the function is active
on your machine.
Soft key Meaning
Current values of the setting Handwheel
No direct
superimp. (Global Program Settings)
selection
possible
Selected coordinate system
Max. val. and Actl.val. of the selected axes
Status of the Reset VT value function
Further information:
(option 44)", page 519
The values of all other settings provided by the Global
Program Settings function are displayed on the GS tab.
Information on tools (TOOL tab)
Soft key Meaning
Display of active tool:
T: Tool number and tool name
RT: Number and name of a replacement tool
Tool axis
Tool length and tool radii
Oversizes (delta values) from the tool table (TAB)
and the TOOL CALL (PGM)
Tool life, maximum tool life (TIME 1) and maximum
tool life for TOOL CALL (TIME 2)
Display of programmed tool and replacement tool
Display for turning tools (TOOL tab)
Soft key Meaning
Display of active tool:
T: Tool number and tool name
RT: Number and name of a replacement tool
Tool axis
Tool lengths, cutting-edge radius and tool orien-
tation
Oversizes (delta values) from the tool table
(TAB) and FUNCTION TURNDATA CORR (PGM)
Tool life, maximum tool life (TIME 1) and
maximum tool life for TOOL CALL (TIME 2)
Display of programmed tool and replacement
tool
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
"Global Program Settings
2
103