HEIDENHAIN TNC 640 User Manual page 231

Programming Aids | TNCguide context-sensitive help system
Navigating in the TNCguide
It's easiest to use the mouse to navigate in TNCguide. A table of
contents appears on the left side of the screen. By clicking the
rightward pointing triangle you open subordinate sections, and by
clicking the respective entry you open the individual pages. It is
operated in the same manner as the Windows Explorer.
Linked text positions (cross references) are shown underlined and
in blue. Clicking the link opens the associated page.
Of course you can also operate TNCguide through keys and
soft keys. The following table contains an overview of the
corresponding key functions.
Soft key Function
If the table of contents at left is active:
Select the entry above it or below it
If the text window at right is active: Move
the page downward or upward if texts or
graphics are not shown completely
If the table of contents at left is active: Open
up the table of contents
If the text window at right is active: No
function
If the table of contents at left is active: Close
the table of contents
If the text window at right is active: No
function
If the table of contents at left is active: Use
the cursor key to show the selected page
If the text window at right is active: If the
cursor is on a link, jump to the linked page
If the table of contents at left is active:
Switch the tab between the display of the
table of contents, display of the subject
index, and the full-text search function and
switching to the screen half at right
If the text window at right is active: Jump
back to the window at left
If the table of contents at left is active:
Select the entry above it or below it
If the text window at right is active: Jump to
next link
Select the page last shown
Page forward if you have used the Select page
last shown function
Move up by one page
Move down by one page
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
5
231