Removing The Shelf Runners With Flexiclip Telescopic Runners; Removing The Back Panel - Miele H2260E Operating And Installation Instructions

Removing the shelf runners
with FlexiClip telescopic
runners
Danger of injury!
Do not use the oven without the
shelf runners correctly inserted.
The shelf runners can be removed
together with the FlexiClip telescopic
runners (if inserted).
If you wish to remove the FlexiClip
telescopic runners separately, follow
the instructions in "Features – Inserting
and removing the FlexiClip telescopic
runners".
Danger of burns! Make sure the
heating elements are turned off and
that the oven cavity is cool.
Pull the runners out of the holder (1.)
at the front of the oven, and then pull
them out of the oven (2.).
The runners can be reinstalled in the
reverse order.
Be sure that all parts are installed
correctly.
Cleaning and care

Removing the back panel

Danger of injury!
Do not use the oven without the
back panel in place.
The back panel can be removed for
cleaning purposes.
Danger of burns! Make sure the
heating elements are turned off and
that the oven cavity is cool.
Disconnect the appliance from the
power supply.
Remove the shelf runners.
Loosen the screws and remove the
back panel.
Clean the back panel (see "Cleaning
and Care - Cleaning the catalytic
enameled back panel").
The runners can be reinstalled in the
reverse order.
Be sure that all parts are installed
correctly.
Reconnect the oven to the electrical
supply.
67