Removing The Back Panel - Miele H 2265-1 E Operating And Installation Instructions

Removing the back panel

The back panel can be removed for
cleaning purposes.

Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, the oven
compartment, or accessories.
Allow the heating element, oven
compartment and the accessories to
cool before removing the back panel.

Risk of injury caused by the
rotating fan impeller.
You could injure yourself on the
impeller of the hot air fan.
Never put the oven into operation
without the back panel in place.
 Disconnect the appliance from the
electricity supply. Switch off at the
wall and withdraw the plug from the
socket, or switch off at the mains
circuit breaker.
 Remove the shelf runners.
 Undo the four screws in the corners
of the back panel and take it out.
 Clean the back panel (see "Cleaning
and care - Cleaning the catalytic
enamelled back panel").
Cleaning and care
Refit in the reverse order.
 Refit the back panel carefully.
Make sure the openings are located as
illustrated in "Oven overview".
 Refit the shelf runners.
 Reconnect the oven to the electricity
supply.
77