Display Screen; Screen Configuration; Basic Screen - Konica Minolta CA-410 Instruction Manual

Display Screen

1. Screen configuration

There are two types of screens: basic and pop-up. The basic screen has three areas—status display, setting, and data display.

2. Basic screen

The screen shown below is the basic screen, which displays the status of the instrument and data.
• Status display
(1) Status display area
Status icon Status information
Measuring
01
Lv
02
03
04
x
05
06
07
08
y
09
10
Save
Data save
(2) Settings area
(1) Status display area
Displays the operating status of the data processor. This is always displayed on the basic screen.
• Status icons and status information
160.00
0.3127
0.3293
Meas Speed: LTD.AUTO
Measurement speed
Measuring
Hold
Measuring (Interval)
Hold (Interval)
Remote
Menu
Select User Calib CH
Check Saved Data
Save Meas. Results
Trigger mode
Trigger mode 0-cal AUTO
y
1.0
0.8
cd/ ㎡
0.6
0.4
0.2
0.0
Φ10 Mini Normal
CH-01 f:Factory
ID: abcdefghij
Sync: MANU. (100. 0ms)
Sync Mode
During normal measurement
In normal measurement hold mode
During interval measurement
Waiting for interval measurement
During communication with a PC
In menu mode ([MENU] key = ON)
When a calibration channel is being selected ([CAL CH]
key = ON)
In saved data checking mode ([DATA] key = ON)
During data saving (save icon + ENTER)
44
0-cal Auto Connect-to display
Battery level
display
Key lock
0.2 0.4 0.6 0.8 1.0 x