Display Screen; Screen Configuration; 1� Screen Configuration; Basic Screen - Konica Minolta CA-410 Instruction Manual

Display Screen

1� Screen configuration
There are two types of screens: basic and pop-up. The basic screen has three areas—status display, setting, and data display.
2� Basic screen
The screen shown below is the basic screen, which displays the status of the instrument and data.
• Status display
(1) Status display area
Status icon Status information
Measuring
01
Lv
02
03
04
x
05
06
07
08
y
09
10
Save
Data save
(2) Settings area
(1) Status display area
Displays the operating status of the data processor. This is always displayed on the basic screen.
• Status icons and status information
160.00
0.3127
0.3293
Meas Speed: LTD.AUTO
Measurement speed
Measuring
Hold
Measuring (Interval)
Hold (Interval)
Remote
Menu
Select User Calib CH
Check Saved Data
Save Meas. Results
Trigger mode
Trigger mode 0-cal AUTO
y
1.0
0.8
cd/ ㎡
0.6
0.4
0.2
0.0
Φ10 Mini Normal
CH-01 f:Factory
ID: abcdefghij
Sync: MANU. (100. 0ms)
Sync Mode
During normal measurement
In normal measurement hold mode
During interval measurement
Waiting for interval measurement
During communication with a PC
In menu mode ([MENU] key = ON)
When a calibration channel is being selected ([CAL CH]
key = ON)
In saved data checking mode ([DATA] key = ON)
During data saving (save icon + ENTER)
30
0-cal Auto Connect-to display
Battery level
display
Key lock
0.2 0.4 0.6 0.8 1.0 x