Table of Contents
Advertisement
l Check whether body and lens have identical serial numbers.
Serial number can be found on label of body and lens side respectively.
To pursue high-accuracy measurement, calibration was done on maker's
side for each unit before shipment combining with each accessory lens
for CA-2500 series. This means that attached calibration coefficient data
to each unit is valid exclusively for the packaged combination of unit and
lens.
l Set lens type to use in software CA-S25w.
( For detail, see the instruction manual for data management software CA-S25w.)
This enables the application of appropriate calibration coefficient data depending on usage condition
which would finally give correct measurement result.
Replacing lens
Follow reverse procedure to above to replace lens. First, remove lens hood and then lens.
17
12
4
警告：
カバーを開けないでください。
ＷＡＲＮＩＮＧ：
Ｄｏ ｎｏｔ ｒｅｍｏｖｅ ｃｏｖｅｒｓ．
ＷＡＲＮＵＮＧ：
Ｎｉｅｍａｌｓ ｄａｓ ｇｅｈａｕｓｅ ｏｆｆｎｅｎ．
１
ＸＸＸＸＸＸ
Advertisement
Table of Contents
