Chapter 6: Settings
Imager
6.25.4.5 EAN 13
Enabled
Set this parameter to on to enable "EAN 13".
Addendum
An addendum is a separate bar code, supplementary to the main bar code.
This parameter provides three options: Disabled, Optional and Required.
Depending on the value chosen for this parameter, an addendum is recognized
or ignored.
•
Double-tap on Addendum to display a dialog box listing your options.
•
Highlight an item, and tap on OK.
When "Addendum" is set to Disabled
addendum. If this parameter is set to Optional
an addendum and if one exists, appends it to the main bar code. When the
parameter is set to Required
without an addendum.
Note: Setting "Addendum" to 'Optional' reduces performance. It should only
be chosen if at least some of the bar codes being read have addendums.
Prefix/Suffix
Refer to page 149 for details.
6.25.4.6 EAN 8
Enabled
Set this parameter to on to enable "EAN 8".
Addendum
Refer to "Addendum" on page 200.
Prefix/Suffix
Refer to page 149 for details.
200
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
the scanner does not recognize an
,
the scanner searches for
,
the scanner does not accept the main bar code
,