Upc/Ean Shared Settings - Psion Teklogix 8100107B User Manual

Chapter 6: Settings
Decoded (HHP)
Expand
This parameter expands the UPC E code to a 12 digit UPC-A format.
Check Digit
If you enable this parameter, a check digit is included with the decoded bar
code data.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded
bar code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code.
Enabling these parameters defines the length of the addendum bar code to either
2 or 5 characters.
Addendum Required
When this parameter is set to on the scanner does not accept the main bar code
,
without an addendum.
Addendum Separator
"Addendum Separator" is a space that is added between the UPC E bar code and the
Add-on code/Addenda. When this parameter is set to on the scanner does not accept
,
the main bar code without an addendum.
Prefix/Suffix
Refer to page 149 for details.

6.25.2.10 UPC/EAN Shared Settings

Extended Coupon Code
This parameter specifies whether or not the imager will read only UPC-A/EAN-13
bar codes that have addenda.
Note: The 2 or 5 digit addenda must be turned on/off, depending on the desired
behavior.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 165