Msi Plessey - Psion Teklogix 8100107B User Manual

Chapter 6: Settings
Decoded (Intermec ISCP)
Set Length L1, Set Length L2, And Set Length L3
Lengths for "Codabar" can be set from 0 to 255. The length of a code refers to the
number of characters (i.e., human readable characters), including check digit(s).
Double-tapping on these parameters displays dialog boxes where you can define the
code length that will be recognized by your scanner.
Length Mode
You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Field Size/Char
Refer to page 148 for details.

6.25.3.12 MSI Plessey

Enabled
Set this parameter to on to enable "MSI".
Enable Plessy
Set this parameter to on to enable "Plessy".
Check Digit Verification
The available options for this parameter are MOD 10 Check and Double MOD 10
Check. This parameter uses the specified algorithm of the option you've chosen to
ensure the integrity of the symbol data before transmitting. If the data does not
contain that algorithm, the data is not transmitted.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Plessy Transmit Check Digit
If the check digit is to be transmitted with the Plessy data, this parameter must
be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code
refers to the number of characters (i.e., human readable characters), including
check digit(s).
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 189