Upc E Settings; Upc/Ean Shared Settings - Psion Teklogix 8100107B User Manual

Chapter 6: Settings
Decoded (Intermec ISCP)
Convert To EAN 13
If this parameter is enabled, a UPC A bar code is converted to EAN 13.
Prefix/Suffix
Refer to page 149 for details.

6.25.3.8 UPC E Settings

Enabled
Set this parameter to on to enable "UPC E".
Enable UPC-E1
Set this parameter to on to allow "UPC-E1" (zero suppressed) bar code scans.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded
bar code data.
Convert To UPC-A
This parameter converts UPC E (zero suppressed) decoded data to UPC A format
before transmission. After conversion, data follows UPC A format and is affected
by UPC A programming selections (e.g. Check Digit).
Prefix/Suffix
Refer to page 149 for details.

6.25.3.9 UPC/EAN Shared Settings

The setting assigned to the "Addendum" parameter associated with this option is
shared across all UPC and EAN bar codes.
186 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual