Psion Teklogix 8100107B User Manual page 266

Chapter 6: Settings
Modem Connection Setup
Stop Bits
This parameter specifies the number of stop bits
communication.
Flow Control
This parameter selects the type of flow control used in your hand-held computer.
The WORKABOUT PRO can perform Software or Hardware handshaking, or you
can choose None.
Terminal
This option is similar to the HyperTerminal program capabilities on your PC.
TCP/IP Settings Tab
Important:
230 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
If your server assigns IP addresses dynamically, you will not need
to change these settings. If you need to make changes, contact
your ISP or network administrator for addresses.
1, 1.5, 2 used for asynchronous
– –