Battery Safety; Removing And Installing The Battery Pack - Psion Teklogix 8100107B User Manual

Chapter 3: Getting To Know The WORKABOUT PRO

Battery Safety

3.3.1 Battery Safety

Important:

3.3.2 Removing And Installing The Battery Pack

Removing The Battery Cover
• Turn off the WORKABOUT PRO before opening the battery cover.
• Turn the fasteners at the base of the battery cover counter-clockwise to
unlock the cover. The top of the stylus has a screwdriver shaped end to help
you loosen the fasteners.
• Lift and remove the cover.
Installing The Battery
• Insert a charged battery in the unit.
• Replace the battery cover, and turn the fasteners at the base of the battery
cover clockwise to lock the battery in place.
Note: If you are using a docking station or other external power source,
you can insert an uncharged battery, dock the unit and switch it on.
Otherwise, always begin the day with a charged battery.
26 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
Before attempting to install, use or charge the battery pack, it is
critical that you review and follow the important safety guidelines
in the section entitled "Lithium Ion Battery Safety Precautions"
beginning on page XVIII.
Battery Cover Fasteners
Battery Cover
Figure 3.4 The Battery Cover