Using The Scu To Connect To The Wlan - Psion Teklogix 8100107B User Manual

Chapter 5: Connecting To A LAN With 802.11

Using The SCU To Connect To The WLAN

The Summit WLAN Adapter dialog box is displayed. You have two options:
• Tap on Use server-assigned IP address to have an address assigned auto-
matically, or
If you want to use a particular IP address, tap on Use specific IP address,
and type the preferred address.
If you tap on the Name Servers tab, you can statically configure the DNS
servers; however, if you use DHCP for IP address assignment, DNS is
usually supplied by the same server that supplied the IP addresses.

5.3.2 Using The SCU To Connect To The WLAN

This section provides a quick set of steps to create a profile (referred to as a config).
Detailed information about each of the SCU tabs – Main, Config, Status, Diags and
Global Settings – is provided under Section 5.4, "SCU Tabs" beginning on page 77.
To launch the SCU so that your hand-held can connect to a wireless LAN:
• Tap on Start>Programs, and then tap on the SCU icon.
74 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual