The Batteries; Chargers And Docking Stations; Installation-Chargers And Docking Stations - Psion Teklogix 8100107B User Manual

9.2 The Batteries

Note: Review "Specifications" on page 327 for detailed information.
The WORKABOUT PRO will operate with a Standard Lithium Ion battery pack, a
High-Capacity Lithium Ion battery pack or three AA alkaline batteries. If you are
using a Lithium Ion battery pack, it must first be charged.
In addition to the main battery, the hand-held is equipped with a rechargable coin
battery – a Maxell ML2032.

9.3 Chargers And Docking Stations

Important: Keep in mind when ordering a charger or docking station, you
must also order the appropriate power cord separately.
Psion Teklogix offers a variety of chargers and docking stations for the
WORKABOUT PRO. These include:
• Single Battery Charger
• Quad Battery Charger
• Desktop Docking Station
PRO C, and Model No. WA4102-G1 for the WORKABOUT PRO S
• Quad Docking Station
9.3.1 Installation–Chargers And Docking Stations
When installing a charger or docking station, consider the following guidelines.
• Keep chargers and docking stations away from excessive dirt, dust and
contaminants.
• Chargers will not charge batteries outside an ambient temperature range
of 0° C to 45 °C (32° F to 113° F). It is recommended that the charger or
docking station be operated at room temperature
(64° F to 77° F) for maximum performance.
After unpacking your unit:
• Visually inspect the charger for possible damage.
• Install the IEC power cord and apply power.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
Chapter 9: Peripheral Devices & Accessories
Model No. WA3001-G1
–
Model No. WA3004-G1
–
Model No. WA4002-G1 for the WORKABOUT
–
Model No. WA4004-G1
–

The Batteries

– between 18° C and 25° C
305