Linking A Workabout Pro To An Ethernet Network; Network Access - Psion Teklogix 8100107B User Manual

• Back up WORKABOUT PRO files to the PC, then restore them from the
PC to the hand-held again, if needed, and so on.
You can use the Getting Started CD included with your WORKABOUT PRO to
install ActiveSync.

9.4.8 Linking A WORKABOUT PRO To An Ethernet Network

An USB-Ethernet adaptor cable
the WORKABOUT PRO to an Ethernet network through a desktop docking station.
Ethernet
Port
• Insert the adaptor's USB connector into the Host USB port on the desktop
docking station.
• Connect your network Ethernet cable to the Ethernet port on the
adaptor cable.
9.4.8.1

Network Access

The hand-held unit automatically detects insertion into the desktop dock and loads
the appropriate drivers to communicate with the USB-Ethernet converters.
Network Addressing
The host application uses standard TCP/IP protocol to name, locate and
communicate with a specific WORKABOUT PRO on the network.
If a link is established between a WORKABOUT PRO and a host, the application
on the host and on the hand-held must have a recovery mechanism in the event that
the WORKABOUT PRO is removed from the dock, interrupting the link.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual

Linking A WORKABOUT PRO To An Ethernet Network

model number WA4010-G1
–
Figure 9.9 USB-Ethernet Adaptor Cable
Chapter 9: Peripheral Devices & Accessories
is used to connect
–
USB
Connector
311