Support For The Avid Pro Tools Insert (Nuage Fader) - Yamaha NUAGE MASTER Ncs500-CT Operation Manual

User Assignable Setup window
1 2 3
1 Open
Reads the saved shortcut key assignments.
2 Save
Saves the shortcut key assignment. The shortcut key
assignment is saved as an ".NPTB" file.
3 U1 – U12
Displays the assigned shortcut keys. Click the key to
display the assigned shortcut keys in the Type in Key
section.
NOTE
You can double-click this button to change the name of this
button.
4 Type in Key
Displays the shortcut keys assigned to the selected
USER ASSIGNABLE key. Click a shortcut key (or
blank) displayed in the Type in Key section, then press
a key on the keyboard to register the shortcut key to
be assigned. (The change is not reflected until you
click the "Assign" button.)
5 Clear
Clears the shortcut key assignment. (The change is
not reflected until you click the "Assign" button.)
6 Assign
Reflects the shortcut keys displayed in the Type in Key
section to the on-screen USER ASSIGNABLE key. The
display of the on-screen USER ASSIGNABLE key
changes to the assigned shortcut keys when you click
this button.
7 Cancel
Discards the change in shortcut keys. The settings for
the Nuage Master USER ASSIGNABLE keys are not
changed.
8 OK
Reflects the change in the shortcut keys in the Nuage
Master USER ASSIGNABLE keys.
Support for the Avid Pro Tools
Insert (Nuage Fader)
4 5
You can now use the "Insert" of Avid Pro Tools using
Nuage Fader. You can use "Insert" on any channel and
edit the "Insert" parameters.
Operation (Insert assignment)
Numbers in the illustration below correspond to the instruction
steps.
6 7 8
1.
On the Mac with Avid Pro Tools, click
NOTE
If the icons are not displayed, install NUAGE PT Bridge in
TOOLS for NUAGE.
2.
Click "Plug-in Panel."
3.
Move the channel for which "Insert" is used to
somewhere between 1 and 8 in the CHANNEL
STRIP section of the Nuage Fader.
NOTE
If you are using multiple Nuage Faders, use 1 to 8 in the
CHANNEL STRIP section of the Nuage Fader on the far left.
4.
Press [e] button of the moved channel for
which "Insert" is used.
5.
Press the ninth [Multi function button A] from
the left.
"ASSIGN" will flash in red.
on the menu bar.
Added functions in NUAGE V1.7
or
75