Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 12

[CUT]
5
Executes the Cut operation. The button lights while held
down.
Lamp Description
Dim The Cut operation can be executed.
Off No events have been selected yet.
[COPY]
6
Executes the Copy operation. The button lights while held
down.
Lamp Description
Dim The Copy operation can be executed.
Off No events have been selected yet.
[PASTE]
7
Executes the Paste operation. The button lights while held
down.
Lamp Description
Dim The Paste operation can be executed.
Off No events have been selected yet.
[SNAP]
8
Turns Snap on (lit) and off (dim).
[AUTO SCROLL]
9
Turns Auto-Scroll on (lit) and off (dim).
[AUTO SELECT]
)
Turns Auto Select Events Under Cursor on (lit) and off
(dim).
JOG WHEEL Section
Overview
This section is for using the [Jog wheel] to operate various
parameters. The particular parameter which [Jog wheel]
affects changes depending on the mode or function of the
[Jog wheel].
[Jog wheel] has the following modes. The buttons used
for selecting the respective modes are indicated in
parentheses.
• Jog mode
• Shuttle mode ([SHUTTLE])
• Scroll mode ([SCROLL])
• Zoom mode ([ZOOM])
• Level mode ([VOLUME])
• Move mode ([MOVE])
The initial, default mode of the [Jog wheel] is the Jog
mode, in which the wheel can be used to move the Project
Cursor. When the Jog mode is enabled, the lamps of the
buttons for selecting the mode are dim. To change the
mode, press and release the desired mode button (the
lamp lights). When you press a lit button, the lamp goes
dim and the mode changes back to the Jog mode. You
can temporarily select a different mode by holding down
the button (the mode changes), and return to the previous
mode by releasing the button.
The [Jog wheel] has the following functions. The buttons
used for selecting the respective functions are indicated
in parentheses.
• Select function ([SELECT])
• Fade In function ([FADE IN])
• Fade Out function ([FADE OUT])
• Trim Head function ([TRIM HEAD])
• Split function ([SPLIT])
• Trim Tail function ([TRIM TAIL])
• Quick Zoom function ([QUICK ZOOM])
For details on a particular mode or function, refer to the
description of the corresponding button for operating the
function and selecting the mode.
NUAGE MASTER Operation Manual
Description of the Device
12