New Parameters In The Control Room Page (Nuage Master) - Yamaha NUAGE MASTER Ncs500-CT Operation Manual

Control Room – INSERT page
1
2
1 Control Room channel selection area
Enables you to select the target channel for "Insert."
2 Insert
Displays the assigned plug-in effects. Touch the effect
name to display the window for selecting the plug-in
effect.
3 Preset
Displays the selected presets. Touch the preset name
to display the window for selecting the presets.
4 On/Off
Turns the "Insert" on (blue) or off (silver).
5 BYP
Turns the "Bypass" on (orange) or off (silver).
6 e (Edit)
Displays the PLUG-IN page for the assigned plug-in
effects.
3 4 5 6
New Parameters in the
CONTROL ROOM Page (Nuage
Master)
You can now operate the Click Level, Click Pan, Listen
Level, and Listen Dim on the CONTROL ROOM page.
Operation
Numbers in the illustration below correspond to the instruction
steps.
1.
Press the [Display access] button in the
CONTROL ROOM section.
2.
Change the parameter using the [Multi
function knob] corresponding to the display
in the Label Pane area.
NOTE
Click Level and Click Pan can be switched using [Multi
function button A] and [Multi function button B].
Added functions in NUAGE V1.7 73