Yamaha NUAGE MASTER Ncs500-CT Supplementary Manual
Hide thumbs
Also See for NUAGE MASTER Ncs500-CT:
- Supplementary manual (10 pages) ,
- Operation manual (36 pages)
Advertisement
Quick Links
NUAGE MASTER
NUAGE FADER
NUAGE I/O
V1.5 Supplementary Manual
This supplementary manual explains features and functions that have been added or changed in NUAGE
V1.5. Please read it together with other related NUAGE manuals.
Main changes
• Added support for remote operation of R series devices
(Dante supported I/O rack)
• Added quick control setting screen
• Added support for VST instruments control
• Added screen scrolling by dragging
• Added support for track visibility configuration function
• Added super fine mode
• Added support for send panning
• Added support for new Nuendo 6.5 plug-in
• Added support for additional Nuendo 6.5 ADR functions
• Added direct monitoring settings
• Added selection function for Ethernet port to use with Avid Pro Tools
• Added other various functions
CONTROL SURFACE
Ncs 500 - CT
CONTROL SURFACE
Ncs 500 - FD
AUDIO INTERFACE
Nio 500 - D16/A16/A8D8
(Nuage Fader)
(Nuage Master)
(Nuage Master)
(Nuage Master)
(Nuage Master)
(Nuage Master, Nuage Fader)
(Nuage Master)
(Nuage Master, Nuage Fader)
(Nuage Master)
(Nuage I/O)
(NUAGE PT Bridge)
(Nuage Master)
page 2
page 2
page 3
page 3
page 4
page 4
page 4
page 5
page 5
page 5
page 6
page 7
EN
Advertisement
Related Manuals for Yamaha NUAGE MASTER Ncs500-CT
Summary of Contents for Yamaha NUAGE MASTER Ncs500-CT
- Page 1 NUAGE MASTER CONTROL SURFACE Ncs 500 - CT NUAGE FADER CONTROL SURFACE Ncs 500 - FD AUDIO INTERFACE NUAGE I/O Nio 500 - D16/A16/A8D8 V1.5 Supplementary Manual This supplementary manual explains features and functions that have been added or changed in NUAGE V1.5.
- Page 2 Added support for remote R series settings In the Nuendo menu, select “Devices” “NUAGE HA operation of R series devices Remote Setup” to open the settings screen and configure (Dante supported I/O rack) the Dante Accelerator you will use. (Nuage Fader) The HA gain of R series devices (Rio3224-D, Ri8-D, etc.) Added quick control setting...
- Page 3 Added support for W (Write) Turns “Write Automation” on (lit) and off (dark). VST instruments control VST instrument name/library name (Nuage Master) Shows the selected instrument and library. You can control VST instruments on instrument tracks on Parameters the CHANNEL CONTROL page. Touch a parameter to control it with a [Multi function knob].
- Page 4 Added support for track Added support for send visibility configuration panning (Nuage Master) function (Nuage Master) Channel “Sends” can now be panned. You can now use the “track visibility control” function of CHANNEL CONTROL – Nuendo 6.5. This can greatly improve work efficiency on large-scale projects.
-
Page 5: Transport Section
Added support for new U7: ADR Status (ADR Status Indicator On/ Off) Nuendo 6.5 plug-in (Nuage Master, Nuage Fader) TRANSPORT Section In ADR mode, the functions of the buttons in the You can now select [DYN] in the SECTION CONTROL TRANSPORT section change. -
Page 6: Network Screen
Identify Added selection function for Searches for the Dante Accelerator specified with “Dante Ethernet port to use with Avid Interface”. When “Identify” is clicked, all LEDs for the Pro Tools (NUAGE PT Bridge) specified Dante Accelerator flash for a few seconds simultaneously, and then stops automatically. -
Page 7: Setup Page
Added other various functions PAGE 3 (Nuage Master) SETUP Page SETUP page is divided into three pages since the number of configurable settings has been increased. PAGE 1 MUTE Button Behavior Switches the behavior of [MUTE] on the channel strip. When set to Continuous, pressing and holding [MUTE] on one channel while pressing [MUTE] on another channel will simultaneously turn on and off all “mute”... - Page 8 Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ C.S.G., PA Development Division © 2014 Yamaha Corporation 405MW-A1...