Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 21

When the pop-up window is shown, the [Input keys] have
the following functions.
[Input keys] Function
[0] – [9] For inputting numbers to the input position.
[]/[] Moves the input digit to right and left.
[BACK SPACE] Deletes the number at the input position.
[CLEAR] Deletes all input numbers.
[SET] Cancels the input then closes the pop-up
window.
[PREV -] Adds -1 to the input number.
[NEXT +] Adds +1 to the input number.
[CYCLE .] Selects the type of Marker to be set. When
off, this indicates Marker, and when lit
indicates Cycle Marker.
[ESC] Cancels the input then closes the pop-up
window.
[ENTER] Determines the input then closes the pop-up
window.
You can set the locator position by [SET] and [LEFT]/
[RIGHT] in the TRANSPORT section. For details, refer to
the description of [LEFT] (page
section.
[Input keys]
7
Inputs the parameter. The input parameter changes
depending on the [Input keys] mode. For details, refer to
the description of the buttons for changing the mode,
such as [LOCATE], [MARKER], etc.
10) in the TRANSPORT
USER ASSIGNABLE Section
Overview
This section is used to execute assigned functions. For
details on assigning functions, see "User Assignable
Settings" (page 44) in NUAGE FADER Hardware Setup.
Controls and Functions
1
2
[Display access]
1
Calls up the "USER ASSIGNABLE Page"
[Multi function display]. When the USER ASSIGNABLE
Page is shown, you can toggle among the banks of the
USER ASSIGNABLE Page.
[U1] – [U12]
2
Executes the assigned function. The button lights while
held down.
Lamp Description
Dim A function can be used.
Off A function cannot be used.
NUAGE MASTER Operation Manual
Description of the Device
(page 38) in the
21