Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 33

When you touch "Channel information," the channel
selection window is shown.
To scroll through the window, touch "u" or "d." When you
touch the channel, the channel is selected and the
window closes.
When you touch "" in the Title area, the window
indicating the output level of the selected channel is
shown.
In this condition, you can adjust the output level by the
rightmost [Multi function knob]. To close the window,
touch "."
Description of the Software Programs
By touching "Nuendo" in the Tool area, you can open the
channels configuration window on the screen. However, in
the PLUG-IN page, the plug-in effect window is opened.
Touch again to close.
Controls and Functions
MAIN Page
This page is for operating Routing, Phase, Low Cut, etc.
for the selected channel.
6
1
2
3
4
5
7
Input Routing
1
Calls up the Input Routing pull-down menu, letting you
select the port.
HC
2
[ PARAM ]
Adjusts the frequency of High Cut.
LC
3
[ PARAM ]
Adjusts the frequency of Low Cut.
Gain
4 [ PARAM ]
Adjusts Input Gain.
Phase
5
Turns phase inversion on (lit) and off.
Summing Mode
6
Turns Summing Mode on (lit) and off. When this is on, you
can output the audio signal of multiple ports at the same
time.
On/Off
7
Turns Direct Routing on (lit) and off.
Direct Routing
8
Selects the port for Direct Routing.
M
9
Turns Mute on (lit) and off.
NUAGE MASTER Operation Manual
9 )
!
8 @ #
33