Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 76

6.
Turn the 16th [Multi function knob] from the
left of the Nuage Fader CHANNEL STRIP
section (the far right knob), then select from
group A – D or E for which insert is used.
"Insert 1 – 4" (A – D) or "Insert 5" (E) will be displayed
on the Plug-in Panel window.
7.
Turn the [Multi function knob] to select the
insert. The [Multi function knob] to be operated
varies depending on the target slot for "Insert."
8.
Press the ninth [Multi function button A] from
the left or the one that corresponds to the
channel with insert.
The selected insert is assigned.
Insert A or E
Insert B
Insert C
Insert D
Operation (Parameter change)
Numbers in the illustration below correspond to the instruction
steps.
1.
On a Mac with Avid Pro Tools, click
on the menu bar.
NOTE
If the icons are not displayed, install NUAGE PT Bridge in
TOOLS for NUAGE.
2.
Click "Plug-in Panel."
3.
Select the "Insert" for which you want to
change the parameters on Avid Pro Tools.
NOTE
You can also select the corresponding channel using the [e]
button for 1 to 8 in the CHANNEL STRIP section of the Nuage
Fader.
4.
Turn the 16th [Multi function knob] from the
left of the Nuage Fader CHANNEL STRIP
section (the far right knob), then select from
group A – D or E depending on which insert is
used.
"Insert 1 – 4" (A – D) or "Insert 5" (E) will be displayed
on the Plug-in Panel window.
Added functions in NUAGE V1.7
or
76