Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 19

Cycle Marker Jump Function
In the Cycle Marker Jump function, you can set the Project
Cursor to the Cycle Marker position by inputting the
Marker ID of the Cycle Marker. When you press [CYCLE .]
in the Marker mode, [CYCLE .] is lit, and the Cycle Marker
Jump pop-up window is shown on the [Multi function
display]. However, when the MARKER Page
the TRANSPORT page is called up in the [Multi function
display], the pop-up window is shown on the Label Pane
area.
When a page other than MARKER is called up in
the [Multi function display]
1
2
3
4
When the MARKER page is called up in the [Multi
function display]
2
Current Position
1
Displays the current Project Cursor position.
Locate To Cycle Marker
2
Inputs the Marker ID.
Marker Position
3
Displays the Marker position of the Marker ID input to
Locate To Cycle Marker.
Marker Name
4
Displays the Marker name of the Marker ID input to Locate
To Cycle Marker.
When the Cycle Marker Jump pop-up window is shown,
the [Input keys] have the following functions.
[Input keys] Function
[0] – [9] For inputting numbers to the input position.
[Input keys]
[]/[]
[BACK SPACE]
[CLEAR]
(page 42) in
[SET]
[PREV -]
[NEXT +]
[CYCLE .]
[ESC]
[ENTER]
[PARAM]
3
Sets the [Input keys] mode to Parameter. In the Parameter
mode, you can directly input a number value to the
parameter in the page called up in the [Multi function
display]. In the Parameter mode, the parameter is focused
before inputting a value when you touch a valid parameter
for editing. To input the parameter value, enter it with the
[Input keys] then press [ENTER].
4
In the Parameter mode, the [Input keys] have the following
functions.
[Input keys]
[0] – [9]
[]/[]
[BACK SPACE]
[CLEAR]
[SET]
[PREV -]
[NEXT +]
[CYCLE .]
[ESC]
[ENTER]
Description of the Device
Function
When the Marker window is open, moves the
marker selection.
Deletes the number at the input position.
Deletes all input numbers.
Selects the Set mode (the button lights).
Adds -1 to the input number.
Adds +1 to the input number.
Selects the Marker Jump function (the button
is unlit).
Cancels the input then closes the pop-up
window.
Determines the input then closes the pop-up
window.
Function
For inputting numbers to the input position.
Moves the input digit right and left.
Deletes the number at the input position.
Deletes all input numbers.
Selects the Set mode (the button lights).
Inputs "-."
Inputs "+."
Inputs a decimal point.
Cancels the input.
Determines the input.
NUAGE MASTER Operation Manual 19