19 Pro Tools Remote Layer; Configuring Windows Computers; Configuring Macintosh Computers (Macos 8.6 To 9.2.2); Configuring Macintosh Computer (Macos X) - Yamaha DM2000 Owner's Manual
Digital production console version 2
Hide thumbs
Also See for DM2000:
- Owner's manual (362 pages) ,
- Service manual (101 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
19 Pro Tools Remote Layer
The DM2000 features a Remote Layer target especially designed for controlling Pro Tools.
If an optional MB2000 Peak Meter Bridge is installed, Pro Tools channel levels are displayed
by the meters, and timecode is displayed on the TIME CODE counter.
Configuring Windows Computers
1
Connect your PC.
The DM2000 can be connected to your Windows PC by connecting the TO HOST SERIAL
port to a suitable RS232 serial port on your PC, or by connecting the TO HOST USB port
to a USB port on your PC. If you use the TO HOST SERIAL port, make sure that the TO
HOST SERIAL parameter on the MIDI/TO HOST Setup page is set to PC-2 (see page 216).
2
Install the necessary drivers.
Once your PC is connected, you'll need to install the TO HOST SERIAL or TO HOST USB
drivers included on the DM2000 CD-ROM.
Configuring Macintosh Computers (MacOS 8.6 to 9.2.2)
Connect your Mac.
1
The DM2000 can be connected to your Mac by connecting the TO HOST SERIAL port to
either the Printer or Modem port on your Mac, or by connecting the TO HOST USB port
to a USB port on your Mac. If you use the TO HOST SERIAL port, make sure that the TO
HOST SERIAL parameter on the MIDI/TO HOST Setup page is set to Mac (see page 216).
2
Install OMS.
The DM2000 communicates with Pro Tools via OMS (Open Music System) software. If you
already have OMS installed on your Mac, there's no need to install it again and you can
move on to the next section. If you don't already have OMS installed, it's included on the
DM2000 CD-ROM. Refer to the OMS documentation included on the DM2000 CD-ROM
for more information on installing.
3
Install Yamaha USB MIDI driver 1.04 or later.
If you are using the TO HOST USB port, you must also install the Yamaha USB MIDI driver
included on the DM2000 CD-ROM. See the included documentation for more informa-
tion.
Configuring Macintosh Computer (MacOS X)
Connect the DM2000 TO HOST USB port to a USB port on your Mac.
1
Install the Yamaha USB MIDI Driver for MacOS X on the computer.
2
Pro Tools Remote Layer
DM2000 Version 2—Owner's Manual
221
Advertisement
Table of Contents
