Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 29

To input parameter values (which allow number input) in
the page, use the Parameter mode in the NUMERIC PAD
section (page 16). To do this:
1.
Press [PARAM] (page
PAD section to select the Parameter mode.
2.
Touch the parameter (which allows number
input) shown on the [Multi function display]
to select it.
3.
Input the number with the [Input keys]
(page 21) in the NUMERIC PAD section.
SETUP Page
Overview
This page is for configuring general settings, such as
touch sensitivity or LED brightness. To open it, press
[SETUP] (page 24) in the MULTI FUNCTION DISPLAY
section.
Touching a column in this page enables that column's
parameter for control with the [Multi function knob].
Controls and Functions
1 2 3 4
9 ) !
Knob
1
Adjusts the touch sensitivity of the [Multi function knob].
The larger the number, the higher the sensitivity.
Slider
2
Adjusts the touch sensitivity of the [Touch slider bar]. The
larger the number, the higher the sensitivity.
19) in the NUMERIC
5 6 7 8
@ # $
Description of the Software Programs
Fader
3
Adjusts the touch sensitivity of the [Fader] on Nuage
Fader. The larger the number, the higher the sensitivity.
LCD
4
Adjusts the touch sensitivity of the [Multi function display].
The larger the number, the higher the sensitivity.
LED Low
5
Adjusts the brightness of the LEDs on the buttons or
knobs (when dimmed). The larger the value, the brighter
the LED.
LED High
6
Adjusts the brightness of the LEDs on the buttons or
knobs (when fully lit). The larger the value, the brighter the
LED.
OLED
7
Adjusts the brightness of the [CONTROL ROOM display]
and the [Channel name display] on Nuage Fader. The
larger the value, the brighter the LED.
LCD
8
Adjusts the brightness of the [Multi function display]. The
larger the number, the brighter the display.
Follow Slider Scroll
9
Turns on and off the function which causes the [Fader]
position on Nuage Fader to follow scrolling through the
channels when you use the [Touch slider bar] on Nuage
fader. When this function is off, the [Fader] position
changes only after you stop scrolling.
Motor
)
Turns the motor power of [Fader] on Nuage Fader on and
off.
Ch Select
!
Turns on and off the function which allows you to select
channels by touching [Fader] on Nuage Fader.
OLED Off Time
@
Configures the period of time that elapses before the
[CONTROL ROOM display] and the [Channel name
display] on Nuage Fader are automatically darkened.
Smart Switch Delay
#
When you press then release the following buttons, the
lamps of the buttons turn on when they are pressed. This
control adjusts the time that elapses before the buttons
light.
• [SHUTTLE] (JOG WHEEL section)
• [SCROLL] (JOG WHEEL section)
• [SELECT] (JOG WHEEL section)
• [ZOOM] (JOG WHEEL section)
• [MOVE] (JOG WHEEL section)
NUAGE MASTER Operation Manual 29