Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 37

AUTOMATION Page
Overview
This page is for controlling the Automation features. The
functions of this page are the same as in the Nuendo
Automation Panel. To open this page, press the
AUTOMATION [Display access] button
Touching the "Nuendo" icon in the Tool area calls up the
Automation Panel within Nuendo. Touching once again
closes it.
Controls and Functions
7 8 9 )
1 2 3
Join
1
Operates Join function.
Fill
2
Operates Fill function.
Preview
3
Operates Preview function.
Suspend Read
4
Operates Suspend Read function.
Suspend Write
5
Operates Suspend Write function.
Show
6
Operates Show function.
(page 22).
! @ # $
4 5 6
Description of the Software Programs
R
7
Turns on Read Automation for all tracks.
R
8
Turns off Read Automation for all tracks.
W
9
Turns on Write Automation for all tracks.
W
)
Turns off Write Automation for all tracks.
Touch
!
Sets Automation Mode to "Touch."
Auto Latch
@
Sets Automation Mode to "Auto Latch."
Cross Over
#
Sets Automation Mode to "Cross Over."
Trim
$
Operates Trim.
NUAGE MASTER Operation Manual 37