Yamaha NUAGE FADER Ncs500-FD Operation Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Music Mixer
  5. Ncs500-FD
  6. Operation manual
Yamaha NUAGE FADER Ncs500-FD Operation Manual

Yamaha NUAGE FADER Ncs500-FD Operation Manual

Control surface
Hide thumbs Also See for NUAGE FADER Ncs500-FD:
Table of Contents

Advertisement

Quick Links

Download this manual
CONTROL SURFACE
NUAGE FADER
Ncs 500 - FD
Operation Manual
Using this manual
This operation manual supports keyword searching and linking as follows.
Keyword searching
Searching for keywords is performed using your pdf viewer's search function. If you are viewing this manual using Adobe
Reader, type the term you wish to find into the Find toolbar and then press your computer's [Enter] key.
Jumping between pages
If using Adobe Reader, you can jump forwards and backwards to various pages in this manual. This provides a
convenient way to return to your original page after clicking a page link.
EN

Advertisement

Table of Contents
loading

Related Manuals for Yamaha NUAGE FADER Ncs500-FD

Summary of Contents for Yamaha NUAGE FADER Ncs500-FD

  • Page 1 CONTROL SURFACE NUAGE FADER Ncs 500 - FD Operation Manual Using this manual This operation manual supports keyword searching and linking as follows. Keyword searching Searching for keywords is performed using your pdf viewer’s search function. If you are viewing this manual using Adobe Reader, type the term you wish to find into the Find toolbar and then press your computer’s [Enter] key.

  • Page 2: Table Of Contents

    Contents Introduction ..................3 How to Read the Manual ..................3 Description of the Device ..............4 Top Panel ......................4 Rear Panel ......................22 Description of the Software Programs..........23 NUAGE FADER Setup ..................23 NUAGE Workgroup Manager................24 Troubleshooting (in operation)............25 Appendix.....................25 Contents of the Getting Started Manual ............

  • Page 3: Introduction

    Introduction Introduction • Keyboard Shortcuts [Windows modifier key]/ [Mac modifier key] + [key] shows the shortcut keys. For example, [Ctrl]/ [command] + [Z] means “press [Ctrl] under Windows or [command] under How to Read the Manual Mac, then press [Z].” •...

  • Page 4: Description Of The Device

    Description of the Device Description of the Device Top Panel SECTION CONTROL Section (page 14) CHANNEL AUTOMATION STRIP Section (page 5) Section (page 16) WORKSPACE Section (page 17) CONTROL ROOM Section (page 17) DAW SELECT Section (page 19) UNIT LINK CHANNEL VIEW Section CONTROL...
  • Page 5 Description of the Device CHANNEL STRIP Section Overview This section is for operating the channel parameters. The channel assignment automatically mirrors that of “Mixer.” The [Multi function knobs] are touch-sensitive knobs for adjusting various parameters. The [Multi function knob] has four separate control operations: touching (which brightens the corresponding parameter indication), turning, pressing, and simultaneously holding down and turning.
  • Page 6 Description of the Device Depending on which controllable parameters are selected The [e] buttons are used to activate Channel Setting mode in the SECTION CONTROL section, the [Multi function in order to edit channels. In this mode, channel knob] has the following functions. parameters can be controlled using the 32 [Multi function knobs].
  • Page 7 Description of the Device Alternatively, if the [e] buttons for two different channels If you again press the [e] button for a channel being are pressed at the same time, it will be possible to edit edited, the “Mixer” will reappear. It should be noted that, both of those channels simultaneously.
  • Page 8 Description of the Device Controls and Functions [Multi function knob] Adjusts the various parameters. The color of the LED on the [Multi function knob] changes depending on the type of the controllable parameter. [Multi function button A]/[Multi function button B] Selects and turns on/off the controllable parameters of the [Multi function knobs].
  • Page 9 Description of the Device [MON] [Touch slider bar] Turns Monitor on (lit) and off (dim). If you hold down one Scrolls through the channels. The operating instructions are [MON] button and press another, Monitor between the two as follows. can be turned on and off. Operation Description When you press [MON] while holding down the...
  • Page 10 Description of the Device [SOLO] You can turn the motor power of the [Fader] on and off. To do this, select it from “Motor” (page 23) in NUAGE FADER Turns Solo or Listen on (lit) and off (dim). If you hold down Setup.
  • Page 11 Description of the Device CHANNEL VIEW CONTROL When you select a channel then press [ LOCK], the selected channel will be moved to the left and entered to Section the Left Lock area. Select a channel Center area Press [ LOCK] Overview This section is for selecting the channel view of “Mixer.”...
  • Page 12 Description of the Device Controls and Functions [OTHERS] Hides (dim) and shows (lit) the following channels. • “MIDI” channels • “Instrument” channels • “Rewire” channels However, channels hidden by [HIDE] are not shown. [EVENT ON TR] Shows channels which have events on the track. [EVENT CYCLE] Shows channels which have events in the Cycle range.
  • Page 13 Description of the Device [LINK] [BANK] Links the selected channels. The parameters of the linked Turns bank scroll on (lit) and off (dim). When this is turned channels are synchronized. To configure the Link on, you can scroll through the channels in groups of eight parameters, edit them from the relevant window in by using []/[].
  • Page 14 Description of the Device SECTION CONTROL Section When you press [EQ] again, the “Section” view and the controllable parameters of the [Multi function knobs] revert back to the default (meaning that none of the buttons such as [QUICK CTRL] and [PRE] are turned on). The same applies when Channel Setting mode is active for the CHANNEL STRIP section in question.
  • Page 15 Description of the Device Controls and Functions [QUICK CTRL] Changes the “Section” view to “QUICK.” The controllable parameters of the [Multi function knobs] (page 8) in the CHANNEL STRIP section change to “Quick Controls.” When the CHANNEL STRIP section is in the Channel Settings mode, you can assign and lock parameters to the [Multi function knobs].
  • Page 16 Description of the Device [CUES] AUTOMATION Section Changes the “Section” view to “CUES.” The controllable parameters of the [Multi function knobs] (page 8) in the CHANNEL STRIP section change to “Cues.” [INSERT] Changes the “Section” view to “INSERTS.” The Overview controllable parameters of the [Multi function knobs] (page 8) in the CHANNEL STRIP section change to...
  • Page 17 Description of the Device WORKSPACE Section CONTROL ROOM Section Overview This section is for recalling Workspaces. To create and lock Workspaces, edit them in Nuendo. Controls and Functions Overview This section is for operating the Control Room functions. To use this section, make sure that Control Room is set to on in Nuendo and that the channels you need have been created, then configure the input/output routings for those channels.
  • Page 18 Description of the Device [CONTROL ROOM LEVEL knob] PAGE CONTROL Section Adjusts the Control Room level. However, when [PHONES] is on, you can adjust the Phones level with this knob. To adjust the level more finely (fine mode), simultaneously hold down the knob and turn it. [SOLO CLEAR] Turns off Solo or Listen for all channels.
  • Page 19 Description of the Device USER ASSIGNABLE Section DAW SELECT Section Overview This section is used to execute assigned functions. To assign the desired function, edit it from “User Assignable Settings” (page 23) in NUAGE FADER Setup. Controls and Functions Overview This section is for selecting the target DAW software for operation.
  • Page 20 Description of the Device UNIT LINK Section FLIP Section Overview This section is for turning on and off UNIT LINK. When you connect multiple Nuage Fader units (up to a maximum of three) and turn on UNIT LINK, the connected Nuage Overview Fader units operate in synchronization.
  • Page 21 Description of the Device [KNOB 1] MODIFIER Section Allows you to operate the controllable parameters of the upper sixteen [Multi function knobs] with the [Faders]. Lamp Description FLIP is on. FLIP is off. [KNOB 2] The same as [KNOB 1]. However, this button is for the lower sixteen [Multi function knobs].

  • Page 22: Rear Panel

    Description of the Device Rear Panel [AC IN] For connection to the power cable. [Power switch] Turns the power on (|) and off (P). NOTICE Rapidly turning the unit on and off in succession can cause it to malfunction. After turning the unit off, wait for at least 6 seconds before turning it on again.

  • Page 23: Description Of The Software Programs

    Description of the Software Programs Description of the Fader Adjusts the touch sensitivity of the [Fader]. The larger the Software Programs number, the higher the sensitivity. LED Low NUAGE FADER Setup Adjusts the brightness of the LED (when dimmed). The larger the value, the brighter the LED.

  • Page 24: Nuage Workgroup Manager

    Description of the Software Programs NUAGE Workgroup Manager Overview NUAGE Workgroup Manager is an application that allows control over devices and DAW software programs as a Workgroup on a Nuage system. For details on NUAGE Workgroup Manager, refer to the NUAGE Workgroup Manager manual (PDF).

  • Page 25: Troubleshooting (In Operation)

    Troubleshooting (in operation) Troubleshooting Appendix (in operation) Contents of the Getting Started Manual A connection cannot be PRECAUTIONS established with Pro Tools. NOTICE • Ensure that the steps described in “Settings for Pro Information Tools” (page 26) have been completed. Introduction A Message from the Development Team Included Accessories...

  • Page 26: Pro Tools Control

    Appendix Pro Tools Control Setting Pro Tools MIDI Controllers Start up Pro Tools. Choose “Setup”  “Peripherals” to open Introduction the “Peripherals” dialog. In addition to Nuendo and Cubase, Nuage Fader and Nuage Master devices can also be used to control Pro Click the “MIDI Controllers”...
  • Page 27 Appendix Button Functions CHANNEL VIEW CONTROL Section [CHANNEL VIEW memory Not applicable. CHANNEL STRIP Section 1] – [CHANNEL VIEW memory 4] [Fader] The faders are used to set channel [INPUT] levels, or to set send levels in Flip mode. [AUDIO] [Touch slider bar] Slide to scroll the channels.
  • Page 28 Appendix PAGE CONTROL Section [CUES] Not applicable. [INSERT] [PAGE] Not applicable. [DYN] [ESC] [EQ] [ENTER] [Sub parameter 1] These buttons are used to select []/[]/[]/[] sends A – E. The button indicator of (up/left/down/right) [Sub parameter 2] the currently selected send lights [Sub parameter 3] [Sub parameter 4] USER ASSIGNABLE Section...

  • Page 29: Added Functions In Nuage V2.1

    Added functions in NUAGE V2.1 Support for the operation of 16 insert slots (Nuage Fader, Nuage Master) ......30 Support for Ambisonics mode in VST MultiPanner (Nuage Master) .........31 Support for remote control of Rio3224-D2 and Rio1608-D2 (Nuage Fader).....31 Support for remote control of RMP-D8 (Nuage Fader) .............32 Added functions in NUAGE V2.1...

  • Page 30: Support For The Operation Of 16 Insert Slots (Nuage Fader, Nuage Master)

    Support for the operation of 16 insert slots (Nuage Fader, Nuage Master) The number of insert slots that can be operated from NUAGE has been increased from 8 to 16. They are supported in Nuendo 10 or later and Cubase 10 or later. Channel Strip The insert slots on the channel strips can be selected using [][] in the SECTION CONTROL section.

  • Page 31: Support For Ambisonics Mode In Vst Multipanner (Nuage Master)

    Support for Ambisonics mode in VST MultiPanner (Nuage Master) It is now possible to operate Ambisonics mode in VST MultiPanner, which was added in Nuendo 8.3 or later and Cubase 10 or later. Ambisonics Operation Screen Support for remote control of Rio3224-D2 and Rio1608-D2 (Nuage Fader) It is now possible to operate the 2nd generation R series (Rio3224-D2 and Rio1608-D2).

  • Page 32: Support For Remote Control Of Rmp-D8 (Nuage Fader)

    Support for remote control of RMP-D8 (Nuage Fader) It is now possible to operate the HA gain on Rupert Neve Designs RMP-D8 with a [Multi function knob]. Press [PRE] in the SECTION CONTROL section, and then press [Sub parameter 2] to operate the “HA GAIN” and “HA GC” on the input channel where the RMP-D8 is connected.

  • Page 33: Added Functions In Nuage V2.0

    Added functions in NUAGE V2.0 Added support for remote operation of the MMP1 (Nuage Fader, Nuage Master, and NUAGE Workgroup Manager) ..................34 Settings (Preparations)......................34 Selecting a monitor source or a cue output (Nuage Master) ..........36 Displaying the status and adjusting the Cue outputs or Studio Speaker outputs (Nuage Master) ..........................

  • Page 34: Added Support For Remote Operation Of The Mmp1 (Nuage Fader, Nuage Master, And Nuage Workgroup Manager)

    Added support for remote operation of the MMP1 (Nuage Fader, Nuage Master, and NUAGE Workgroup Manager) Certain MMP1 functions can be controlled from the Nuage series. Settings (Preparations) Set the control source to Nuage Fader and/or Nuage Set the IP address. Master and the control target to MMP1 with the NUAGE To control MMP1 from the Nuage Fader and/or Nuage Workgroup Manager.
  • Page 35 Confirm the connection between the MMP1 and Nuage device. When the MMP1 and Nuage device is connected correctly, the MMP1 indicator will light up in green. When the MMP1 indicator lights up in red (this means connection failure), the possible causes are as follows: •...

  • Page 36: Selecting A Monitor Source Or A Cue Output (Nuage Master)

    Selecting a monitor source or a cue output (Nuage Master) Using the MONITOR SOURCE section of Nuage Master, you can select an audio source or cue output for monitoring. MONITOR SOURCE Section 1 Displays the “Monitor Source” page on the [Multi function display].
  • Page 37 MMP1 Editor — Main screen — Monitor Control tab MMP1 Controller — Control view MMP1 Controller — Editor view — Main Monitor Added functions in NUAGE V2.0...

  • Page 38: Displaying The Status And Adjusting The Cue Outputs Or Studio Speaker Outputs (Nuage Master)

    Displaying the status and adjusting the Cue outputs or Studio Speaker outputs (Nuage Master) Using the CUES section of Nuage Master, the status of the Cue outputs and Studio Speaker outputs of the MMP1 can be displayed, and the output levels can be adjusted. CUES section 1 Displays the “CUES”...
  • Page 39 MMP1 Editor — Sub screen Added functions in NUAGE V2.0...

  • Page 40: Monitor Control (Nuage Fader, Nuage Master)

    Monitor Control (Nuage Fader, Nuage Master) Using the CONTROL ROOM section of the Nuage Fader and Nuage Master, you can control the Downmix, Dimmer on and off, and monitor output levels. Nuage Fader — CONTROL ROOM section 1 Turns the Downmix audio output on (lit) or off (unlit). NOTE When the Headphone output is selected for control, this button is disabled.
  • Page 41 Control Room page 1 Turns the Main Monitor output on (lit) or off (unlit). 2 Displays the Monitor Level. 3 Turns the dimmer on (lit) or off (unlit). 4 Changes the Monitor Level value to the reference level value. Holding this down for at least two seconds (until the indicator flashes) stores the current Monitor Level value as the reference level.
  • Page 42 MMP1 Editor — Settings screen — Scene tab/MISC/Audio MMP1 Controller — Control view MMP1 Controller — Editor view — Main Monitor NOTE The User Assignable functions that are displayed depend on the settings you’ve made. Added functions in NUAGE V2.0...

  • Page 43: Talkback On Or Off (Nuage Master)

    Talkback on or off (Nuage Master) Using the COMMUNICATION section of Nuage Master, you can turn Talkback on or off. COMMUNICATION section 1 Displays the “Communication” page on the [Multi function display]. 2 Turns the Talkback Destination 1 on (lit) or off (unlit). Communication page 1 Turns the Talkback Destination 1-8 on (lit) or off (unlit).

  • Page 44: Added Support For Elevation Pattern Selection (Nuage Fader)

    Added support for Elevation Pattern selection (Nuage Fader) The Elevation Patterns of the VST MultiPanner plug-in available on Nuendo 7.1 or later can be selected on the Nuage Fader. The Elevation Patterns are displayed in the Label Pane when you select the VST MultiPanner on the Nuendo. You can switch the Elevation Pattern with the corresponding [Multi function button].

  • Page 45: Added Support For Cursor Operation Outside The Project Window (Nuage Master)

    Added support for cursor operation outside the Project Window (Nuage Master) The operation target window when []/[]/[]/[] buttons are pressed can be selected from the Project Window or the window displayed in the foreground. Operation Numbers in the illustration below correspond to the instruction steps.

  • Page 46: Added Functions In Nuage V1.7

    Added functions in NUAGE V1.7 Channel Connection for VCA Fader (Nuage Fader) ............47 Assignment Change for Keys in SECTION CONTROL Section (Nuage Fader) ....47 Assignment Change for Keys in CHANNEL VIEW CONTROL Section (Nuage Fader) .. 48 Expanded CHANNEL VIEW Memory (Nuage Fader) ............. 48 Display All Function for All Channel Types (Nuage Fader) ..........

  • Page 47: Channel Connection For Vca Fader (Nuage Fader)

    Channel Connection for VCA Assignment Change for Keys Fader (Nuage Fader) in SECTION CONTROL Section (Nuage Fader) You can now use Nuage Fader to connect or disconnect channels for a VCA fader created in Nuendo (7 or later). You can now change the assignment of keys in the Operation SECTION CONTROL section.

  • Page 48: Assignment Change For Keys In Channel View Control Section (Nuage Fader)

    Assignment Change for Keys Expanded CHANNEL VIEW in CHANNEL VIEW CONTROL Memory (Nuage Fader) Section (Nuage Fader) There are now eight save slots for CHANNEL VIEW memory that can be used for storing and recalling You can now change the assignment of keys in the channel display statuses.

  • Page 49: Expanding And Collapsing Folder Tracks (Nuage Master)

    Expanding and Collapsing New Parameter Setting Method Folder Tracks (Nuage Master) for Quick Controls (Nuage Fader, Nuage Master) You can now expand and collapse a folder track using Nuage Master when you have selected a folder track in You can now set the parameter assignments for the the project window.

  • Page 50: Expanded Adjustment Function For "Mixer" Window Width (Nuage Fader)

    Expanded Adjustment Operation (Nuage Master) Numbers in the illustration below correspond to the instruction Function for “Mixer” Window steps. Width (Nuage Fader) In addition to the conventional items, you can now also adjust the “Mixer” bottom positions. Operation Numbers in the illustration below correspond to the instruction steps.

  • Page 51: Support For Gpio (Nuage Master)

    Support for GPIO (Nuage Device page Enables you to set whether to turn the GPIO function on or Master) off, and perform basic settings for using the GPIO function. You can now receive GPIO input in Nuage Master or output GPIO signals from Nuage Master via JL Cooper eBOX/eBOX GPI8.
  • Page 52 Port page For Input, this turns on when the input port Enables you to select the GPIO functions. You can select voltage is Low. For Output, the output port voltage is set to Low up to 32 functions for input and output, respectively. when the function is on.

  • Page 53: Setting Automation Mode For Each Track (Nuage Master)

    Setting Automation Mode for Insert Operation for Control Each Track (Nuage Master) Room Channels (Nuage Master) You can now use the [Multi function display] to set the automation mode for each track. You can now use the [Multi function display] to operate Operation the “Insert”...

  • Page 54: New Parameters In The Control Room Page (Nuage Master)

    New Parameters in the Control Room – INSERT page CONTROL ROOM Page (Nuage Master) You can now operate the Click Level, Click Pan, Listen Level, and Listen Dim on the CONTROL ROOM page. Operation Numbers in the illustration below correspond to the instruction steps.

  • Page 55: New Settings For Saving Project Files (Nuage Master)

    New Settings for Saving Support for Avid Pro Tools Project Files (Nuage Master) Shortcut Keys (Nuage Master) You can now select whether to overwrite the project file or You can now assign Avid Pro Tools shortcut keys to Nuage save as a new file when you press [SAVE] in the Master's USER ASSIGNABLE keys.

  • Page 56: Support For The Avid Pro Tools Insert (Nuage Fader)

    Support for the Avid Pro Tools User Assignable Setup window Insert (Nuage Fader) You can now use the “Insert” of Avid Pro Tools using Nuage Fader. You can use “Insert” on any channel and edit the “Insert” parameters. Operation (Insert assignment) Numbers in the illustration below correspond to the instruction steps.
  • Page 57 Turn the 16th [Multi function knob] from the Operation (Parameter change) left of the Nuage Fader CHANNEL STRIP Numbers in the illustration below correspond to the instruction steps. section (the far right knob), then select from group A – D or E for which insert is used. “Insert 1 –...
  • Page 58 Press the [Multi function button A] that Turn the [Multi function knob] or press the corresponds to the “Insert” you want to [Multi function button] corresponding to the change the parameters of. parameter and change the parameter’s value. The value you change to will immediately be applied. Insert A or E Insert B Insert C...

  • Page 59: Display Method For Nuage Pt Bridge Window (Nuage Pt Bridge)

    Display Method for NUAGE PT Lock Function for the Dante Bridge Window (NUAGE PT Network Interface (Nuage I/O) Bridge) A lock function has been added so that the Dante network interface is not changed while Nuendo or Cubase is The procedures for displaying the following window, running.

  • Page 60: Initializing Direct Monitoring Settings (Nuage I/O)

    Initializing Direct Monitoring Settings (Nuage I/O) You can now initialize the settings for direct monitoring in Nuage I/O. Operation Numbers in the screen shot below correspond to the instruction steps. From the Nuendo or Cubase menu, click “Devices,” then “NUAGE I/O Setup.” Click the “Direct Monitoring”...

  • Page 61: Added Functions In Nuage V1.6

    Added functions in NUAGE V1.6 Added Support for Cubase Pro 8 (Nuage Master, Nuage Fader) ........62 Updated Direct Monitoring Window in Nuage I/O Setup (Nuage I/O) ......64 Added Stereo Panner Switching Function (Nuage Fader) ..........64 Added More Parameters to Channel Strip Section (Nuage Fader) ........65 Added Support for Switching Parameters in Channel Setting Mode (Nuage Fader) ..

  • Page 62: Added Support For Cubase Pro 8 (Nuage Master, Nuage Fader)

    Added Support for Cubase Pro 8 (Nuage Master, Nuage Fader) Cubase Pro 8 is now supported. The following new functions are also supported. VCA Fader You can show/hide the VCA Fader with [OTHERS] in the CHANNEL VIEW CONTROL section. DeEsser You can now adjust the DeEsser parameters with Nuage High Cut and Low Cut Filter Slopes Fader and Nuage Master.
  • Page 63 Channel Strip Recording MIDI Events to the Tracks You can adjust the following parameters on the INSERT page of Nuage Master CHANNEL CONTROL. MIDI/Audio (Only for Instrument Tracks) Switches the type of plug-in. To record the MIDI events, Channel Setting Mode select “MIDI.”...

  • Page 64: Updated Direct Monitoring Window In Nuage I/O Setup (Nuage I/O)

    Updated Direct Monitoring Added Stereo Panner Window in Nuage I/O Setup Switching Function (Nuage (Nuage I/O) Fader) The connection destinations for output buses that are the You can now switch between the types of stereo panners targets of direct monitoring are now displayed in the in Nuage Fader.

  • Page 65: Added More Parameters To Channel Strip Section (Nuage Fader)

    Added More Parameters to Added Support for Switching Channel Strip Section Parameters in Channel Setting (Nuage Fader) Mode (Nuage Fader) You can now adjust HC SLOPE, LC SLOPE, GAIN, You can now switch sub-parameters in the Channel  (PHASE), HA HPF, and HA +48V in the channel strip. Setting mode to make adjustments to parameters.

  • Page 66: Added Collective Bypass Function For Inserts (Nuage Fader)

    Added Collective Bypass Added Collective Bypass Function for Inserts Function for Dynamics (Nuage Fader) (Nuage Master) You can now turn bypass on/off for “Inserts” on the You can now turn bypass on/off for “Dynamics” on the selected channels. selected channels. Operation Operation 1.

  • Page 67: Added Support For Rmio64-D (Nuage Workgroup Manager)

    Added Support for RMio64-D Output Clock Source Enables you to select the MADI output signal when SRC is (NUAGE Workgroup Manager) on as the word clock source. Same as Input Syncs the MADI output signal with the You can now control the RMio64-D Dante/MADI Clock Source MADI input signal.

  • Page 68: Changed Display On The Marker Jump Pop-Up Window Into The List Display (Nuage Master)

    Changed Display on the Added a Function for Project Marker Jump Pop-Up Window Cursor Positioning into the List Display (Nuage Master) (Nuage Master) You can now enter values in units of hours, minutes, and seconds to position the “Project Cursor” on the The pop-up display for the Marker Jump function and TRANSPORT page.

  • Page 69: Added Enable/Disable Selection For [Jog Wheel] During Project Playback (Nuage Master)

    Added Enable/Disable Selection for [Jog wheel] during Project Playback (Nuage Master) You can now disable [Jog wheel] operation during Project playback. Doing so will prevent unintended operation of the Project cursor during playback. Settings Switch the setting by using the “JOG Operation during Playback”...

  • Page 70: Added Functions In Nuage V1.5

    Added functions in NUAGE V1.5 Added support for remote operation of R series devices (Dante supported I/O rack) (Nuage Fader) ..........................71 Added quick control setting screen (Nuage Master) ............71 Added support for VST instruments control (Nuage Master) ........... 72 Added screen scrolling by dragging (Nuage Master) ............

  • Page 71: Added Support For Remote Operation Of R Series Devices (Dante Supported I/O Rack) (Nuage Fader)

    Added support for remote R series settings In the Nuendo menu, select “Devices”  “NUAGE HA operation of R series devices Remote Setup” to open the settings screen and configure (Dante supported I/O rack) the Dante Accelerator you will use. (Nuage Fader) The HA gain of R series devices (Rio3224-D, Ri8-D, etc.) Added quick control setting...

  • Page 72: Added Support For Vst Instruments Control (Nuage Master)

    Added support for W (Write) Turns “Write Automation” on (lit) and off (dark). VST instruments control VST instrument name/library name (Nuage Master) Shows the selected instrument and library. You can control VST instruments on instrument tracks on Parameters the CHANNEL CONTROL page. Touch a parameter to control it with a [Multi function knob].

  • Page 73: Added Support For Track Visibility Configuration Function (Nuage Master)

    Added support for track Added support for send visibility configuration panning (Nuage Master) function (Nuage Master) Channel “Sends” can now be panned. You can now use the “track visibility control” function of CHANNEL CONTROL – Nuendo 6.5. This can greatly improve work efficiency on large-scale projects.

  • Page 74: Added Support For New Nuendo 6.5 Plug-In (Nuage Master, Nuage Fader)

    Added support for new TRANSPORT Section Nuendo 6.5 plug-in (Nuage In ADR mode, the functions of the buttons in the TRANSPORT section change. Master, Nuage Fader) [PREROLL] You can now select [DYN] in the SECTION CONTROL Turns Pre Roll on and off in Free Run mode. section to control the parameters of the new Nuendo 6.5 This button does not function in any mode other than Free plug-in (Magneto II).

  • Page 75: Added Selection Function For Ethernet Port To Use With Avid Pro Tools (Nuage Pt Bridge)

    Added selection function for Identify Searches for the Dante Accelerator specified with “Dante Ethernet port to use with Avid Interface”. When “Identify” is clicked, all LEDs for the Pro Tools (NUAGE PT Bridge) specified Dante Accelerator flash for a few seconds simultaneously, and then stops automatically.

  • Page 76: Added Other Various Functions (Nuage Master)

    Added other various functions PAGE 3 (Nuage Master) SETUP Page SETUP page is divided into three pages since the number of configurable settings has been increased. PAGE 1 MUTE Button Behavior Switches the behavior of [MUTE] on the channel strip. When set to Continuous, pressing and holding [MUTE] on one channel while pressing [MUTE] on another channel will simultaneously turn on and off all “mute”...

  • Page 77: Added Functions In Nuage V1.2

    Added functions in NUAGE V1.2 Added support for remote operation of AD8HR remote preamp from Nuage Master (Nuage Master) ....................... 78 Improved the EQ Band Curve display (Nuage Master) ........... 78 Added support for marker colors in Nuendo (Nuage Master) .......... 78 Improved parameter indications on the Multi Function Display (Nuage Master) .....
  • Page 78 Added support for remote Added support for marker operation of AD8HR remote colors in Nuendo preamp from Nuage Master (Nuage Master) (Nuage Master) Marker colors set on the Nuendo are reflected in the MARKER Page. The AD8HR can be controlled also from the Nuage Master.
  • Page 79  The Surround Panner Improved pan control Sub parameter 1 Sub parameter 2 Sub parameter 3 operations from the channel strip (Nuage Fader) The pan parameters which were not able to be conventionally operated from the channel strips can be controlled by changing the sub parameters.

  • Page 80: Added Functions In Nuage V1.1

    Added functions in NUAGE V1.1 Added the ADR mode (Nuage Master) ................81 Added the functions for configuring the buttons in the USER ASSIGNABLE section (Nuage Master, Nuage Fader) ..................... 82 Added support for remote operation of the AD8HR remote preamp (Nuage Fader) ..83 Added the display in the [Channel name display] (Nuage Fader) ........

  • Page 81: Added The Adr Mode (Nuage Master)

    Added the ADR mode ADR Page (Nuage Master) Added the ADR mode corresponding to the ADR function of Nuendo 6. TRANSPORT Section Press [Display access] repeatedly to display an “ADR page” (shown on the right), and then touch “Transport Switch” in the [Multi function Display] to select the ADR mode.

  • Page 82: Added The Functions For Configuring The Buttons In The User Assignable Section (Nuage Master, Nuage Fader)

    Added the functions for NUMERIC PAD Section configuring the buttons in the USER ASSIGNABLE section (Nuage Master, Nuage Fader) The function assignments can be saved, and the saved assignments can be recalled. The functions can be assigned to each Nuage Fader. USER ASSIGNABLE Page (Nuage Master) [MARKER]...

  • Page 83: Added Support For Remote Operation Of The Ad8Hr Remote Preamp (Nuage Fader)

    Added support for remote NUAGE MASTER Setup To open this window, click the Nuendo menu “Devices”  operation of the AD8HR “NUAGE MASTER Setup.” remote preamp (Nuage Fader) Overview The gains of the AD8HR connected to the Nuage I/O can be controlled.
  • Page 84 Setting up the Nuage I/O Operation Function Open the “Nuage I/O Properties” from the NUAGE HA +48V Turns +48 V phantom power on and off. To Workgroup Manager, and then set the “ID” number of the turn on phantom power, hold down the AD8HR.

  • Page 85: Added The Display In The [Channel Name Display] (Nuage Fader)

    Added the display in the Added display channels on [Channel name display] the LCD (Nuage Fader) (Nuage Fader) The previous view can be called up after using the Agent function ([SEL CH], etc.), and you can scroll through and The whole name of the channel strip can be scrolled and display the selected channels when the desired channel displayed, and the display format can be changed.

  • Page 86: Added Some Track Select Operations (Nuage Master)

    Added some track select [L] / [R] (left/right) If you use the following functions when the channels operations (Nuage Master) displayed are fewer than the number of faders of the Nuage Fader (e.g., when you are using the Agent Tracks can be selected by the NUMERIC PAD, and function, etc.), you can operate adjacent channels.

  • Page 87: Added Some Zoom In And Zoom Out Operations (Nuage Master)

    Added some Zoom In and When the Select Track pop-up window is shown, the [input keys] have the following functions. Zoom Out operations [Input keys] Function (Nuage Master) [0] – [9] Inputs the track number to the input position. Some Zoom-related operations were added. [BACK SPACE] Deletes the number at the input position.

  • Page 88: Added Some Editing Operations (Nuage Master)

    Added some editing Numeric Pad Input Selects the input format when you set the Project Cursor operations (Nuage Master) position in the Locate function. If you set this to “Right,” you can input the Project Cursor position as a text. The waveform offset can be changed, and the cut/copied event(s) can be pasted maintaining the position relative to the Project Cursor.
  • Page 89 Yamaha Pro Audio global website http://www.yamahaproaudio.com/ Yamaha Downloads https://download.yamaha.com/ Manual Development Group © 2013 Yamaha Corporation Published 06/2019 MW-C0...

Table of Contents