Yamaha NUAGE MASTER Ncs500-CT Operation Manual page 97
Hide thumbs
Also See for NUAGE MASTER Ncs500-CT:
- Supplementary manual (10 pages) ,
- Supplementary manual (10 pages) ,
- Supplementary manual (8 pages)
Table of Contents
Advertisement
Added support for remote
operation of AD8HR remote
preamp from Nuage Master
(Nuage Master)
The AD8HR can be controlled also from the Nuage
Master. For details on connecting to the AD8HR and
making necessary settings, refer to the “NUAGE V1.1
Supplementary Manual.”
CHANNEL CONTROL – MAIN Page
Operation
Function
HA GAIN
Adjusts the gain.
HA TRIM
Adjusts the gain trim. To adjust the gain trim,
press [Multi function button A] to unlock the
parameter.
HA HPF
Turns the High Pass Filter on and off. You can also
adjust the cut-off frequency [20 – 600 Hz].
HA +48V
Turns +48 V phantom power on and off. To turn on
phantom power, hold down the [Multi function
button A] for longer than two seconds.
Improved the EQ Band Curve
display (Nuage Master)
The EQ band curve and the EQ band parameters
currently being operated are displayed on the EQ Graph
in the EQ page.
CHANNEL CONTROL – EQ Page
EQ band curve
Added support for marker
colors in Nuendo
(Nuage Master)
Marker colors set on the Nuendo are reflected in the
MARKER Page.
TRANSPORT – MARKER Page
Nuendo — Marker track
Improved parameter
indications on the Multi
Function Display
(Nuage Master)
The border of the parameter currently being operated by
the [Multi function knob] is highlighted.
Page 97
Advertisement
Chapters
Table of Contents
