Table of Contents
Advertisement
If the versions are not fitting together, that means: the updated firmware of Base-unit is not compatible to
others, a new window appears:
6.2
Upgrading Firmware Base-unit
After the update of firmware of Base-unit, you have to make a RESET, where all data of configuration will be lost.
So that you do not have to re-configure all data in a difficult process, note all settings within the Sub-menus.
At first, update the Base-unit by a "Full-Update" through an USB drive as follows.
1.
Please check, if there is a newer firmware available at web-page www.klickandshow.com. If appropriate,
then download the actual firmware.
2.
Copy the updating file "update.bin" to the root directory of the USB drive.
MAC OSX
41
Advertisement
Table of Contents
