Table of Contents
Advertisement
:
4.1.2
Enable LAN Connection
Be sure the Klick & Show is connected to the Network. When Local IP shows an active IP address, such for
example like 192.168.3.1, it indicates the Base-unit is successfully connected to the LAN and get an appointed IP
address.
Note:
when it shows "N/A", means the Base-unit is not connected to the LAN by by CAT cable or it failed to get an
available IP address by the corporation router.
Please refer to the "LAN port connection' page, check on the LAN discovery & connection, as below.
Default password for entering the Main menu is "admin".
24
Advertisement
Table of Contents
