Table of Contents
Advertisement
9.
After reboot, the home page will appear again with the Home screen.
10. Please click the Setting button to open the menu, to check whether the correct FW version is upgraded.
11. The update of Base-unit is finished.
6.3
Upgrading Sensor-button TOUCH
1.
Plug the to be updated Sensor-button TOUCH to either of the two USB port of Base-unit. It will
automatically show up a message to indicate if the installed firmware of Sensor-button is older, and needs
to be upgraded also, as shown below.
2.
Click Ok to start the upgrading progress, as shown below.
44
Advertisement
Table of Contents
