Table of Contents
Advertisement
Choose and click Windows- or MAC Starter-program. Click the folder, where the "WirelessMedia" exe. program
stores . Run the *.exe program.
B. Download to an USB-stick at Base-unit
Plug a USB-stick to USB port of Base-unit and copy Start-program „WirelessMedia.exe" to USB-stick by
clicking on symbol
1.
The Starter-program is written tot he USB-stick, a OSD-windows shows the progress. When ready, unplug
the USB-stick.
2.
Plug the USB-stick to your PC and copy the *.exe-file to your PC, execute the file. You do not need admin-
rights.
When the Starter-program is pre-installed one time, Klick & Show is ready to use immediately. You do
not need to repeat above steps for next use.
It is always recommended to update the integrated USB-stick of the Sensor-button TOUCH also. Copy the
APP for Windows and MAC to this memory. Proceed as described in chapter 6.4 section B. New files will
overwrite the old files.
.
46
Advertisement
Table of Contents
