Table of Contents
Advertisement
Instead of a Mouse also a local connected touch Screen can be used
Via this USB Port you can create a USB Stick containing the Starter-Program-Software for the Sensor-button
TOUCH
POWER button
The button at the front of the Base-unit has a power on/off function once the Base-unit is powered.
Pressing the Button switches the unit on and off (takes a few seconds each).
2.1.2
ID
1
DC Power socket
2
3
4
5
6
7
8
9
Rear Panel
Name
Connect the included power adapter DC 12V/2A to this socket,
and connect the plug to an available electrical outlet
Connect an Ethernet cable between this jack and a LAN to
LAN
connect the Base-unit to LAN; PoE ready
USB port, for pairing Sensor-button TOUCH, mouse control, USB
USB port
touch screen etc.; same functions as front-USB
Reset
for restoring the factory default setting
HDMI OUT
To connect an HD or 4K/HDMI2.0 output device
2 channel analog audio output. Connect a 3.5 mm mini-jack PC
LINE OUT
connector from this jack to the Line In jack of an audio system.
Connect an local HDMI input, up to 4K_60Hz, HDCP2.2 source
HDMI IN
device
2 channel analog audio input is active, when it detects no audio
signal in HDMI IN, like DVI-Input. Connect a 3.5 mm mini-jack
LINE IN
PC connector from this jack to the Line Out jack of an external
audio source devices.
ANT.
Screw up the included two antennas to these two ports
Description
8
Advertisement
Table of Contents
