Table of Contents
Advertisement
3.
Connect the USB drive to either USB port of Base-unit.
Note: each port can handle max. load of 500 mA.
4.
Connect a HDMI display to Base-unit, HDMI output port, connect a mouse, turn on by press the front panel
power button.
5.
The display device shows the home page after normal boot of the device, as shown below:
On the open-up menu, click the "System Update" as shown below
Follow the on-scree instructions: „Update", „OK".
Attention!!
Do not disconnect power during upgrading progress. Or, the unit firmware will be corrupted.
6.
The upgrading progress displays as shown below, and the unit will reboot automatically after complete the
updating 100%, as shown below.
42
Advertisement
Table of Contents
