Table of Contents
Advertisement
3.
After the upgrading is completed, it shows a "Upgrade OK!" as below
4.
Plug out the Sensor-button TOUCH.. Now, the upgrading progress is finished. Update all Sensor-buttons
accordingly.
Software update of Starter-Program
6.4
After updating of Base-unit and Sensor-buttons may need to upgrade the Starter-program on PC / laptop also.
Please check, if the Klick & Show function at PC generates an error message. In this case the Starter-program
needs also a new version.
There are several possibilities:
A. Download from website:
1. Download APP for Windows or macOS from Internet
2. Execute the file. You do not need admin-rights. Plug a Sensor-button TOUCH to the USB port of your PC
or Laptop. The Klick & Show application is starting automatically and you can share your screen.
Note: you can download the Starter-program from the Base-unit also, by WiFi or WLAN. See SSID, PASSWORD, IP
address in status-line of Home page of Base-unit. Connect your PC with the WiFi of the Base-unit. Open a Browser
on your PC and enter WiFi IP 192.168.43.1:8000, see webpage of Base-unit below:
www.klickandshow.com,
to your PC / Laptop.
45
Advertisement
Table of Contents
