Table of Contents
Advertisement
7. Operation Guide for Klick & Show
7.1
Transmitting PC desktop
7.1.1
Operating system requirement: Windows XP/Vista/7/8/8.1/10 32 & 64 bit
When you are using Klick & Show for the first time on your laptop or for guests, you have to copy the Starter-
program "WirelessMedia" first on your Laptop / PC. Run this Starter-program.
When the Starter-program is pre-installed one time, Klick & Show is ready to use, with plug-in of Sensor-
button. Continue with Step 2.
1. When Starter-program „WirelessMedia-windows.exe" is not yet been installed on PC, please proceed,
as is explained in chapter 4.3.
2. Plug a Sensor-button TOUCH to the USB port of your PC or Laptop. The Klick & Show application is
starting automatically and a symbol is displayed in the task bar of the PC/laptop
3. Until the Sensor-button shows a static green LED indicator, or until you see a message table showing up
at the right bottom corner of desktop "Ready to share",
A Klick & Show status icon is added to the Windows status bar at the right bottom corner
Right click it to open up the setting of Klick & Show, including:
a.
"Extended Desktop": check to transmit the extended desktop of PC/Laptop, or as default set, to
mirror the desktop of PC/Laptop.
b. "About": click to check the software version of Base-unit, Sensor-button TOUCH and Starter-
program.
Microsoft Windows PC / Laptop
.
Klick & Show is ready.
.
48
Advertisement
Table of Contents
