Table of Contents
Advertisement
5.1
Ethernet
Includes IP address, Ethernet MAC address, Proxy & IP settings, PPPoE &
5.1.1
The local IP address of Base-unit.
5.1.2
Shows the static MAC address of the Base-unit. The MAC Address clearly designates the hardware of each
individual network device.
5.1.3
Click to configure a proxy server.
Proxy & IP settings
Proxy: Click in the check box, to select the check box of "None" or "Manual"
IP settings: Click to select the check box, which includes "Static" or "DHCP". When set to Static IP
o
address, it will open-up an advance setting page, which including the set items below. Click in
the input field to fill out the number.
IP address: Fill out the 4 fields correct.
o
Gateway: Fill out the 4 fields correct (usually the Gateway has the IP address of the router). If no
o
router on the local subnet, then just set it to any IP address on the subnet. )
Network prefix length: in the input field to fill out the number defined by the subnet mask.
o
Default is 24.
DNS1: Fill out the 4 fields correct.
o
DNS2: Fill out the 4 fields correct.
o
After finish, please click the "Set" to save and return. Or, please click "Cancel".
IP address
Ethernet MAC address
Proxy & IP settings
Settings.
30
Advertisement
Table of Contents
