1. Manuals
  2. Brands
  3. Kindermann Manuals
  4. Digital Presenters
  5. Klick & Show K-10S
  6. Installation and user manual

Kindermann Klick & Show K-10S Installation And User Manual

Wireless presentation solution
Hide thumbs Also See for Klick & Show K-10S:
Table of Contents

Advertisement

Quick Links

Download this manual
Wireless Presentation Solution
Klick & Show K-10S
Klick & Show K-10L Lite -
Installation and User Manual
Release: Firmware 2.2.8C / E
2.2019
-
Art.-Nr. 7488000300
Art.-Nr. 7488000305
1

Advertisement

Table of Contents
loading

Related Manuals for Kindermann Klick & Show K-10S

Summary of Contents for Kindermann Klick & Show K-10S

  • Page 1 Wireless Presentation Solution Klick & Show K-10S Art.-Nr. 7488000300 Klick & Show K-10L Lite - Art.-Nr. 7488000305 Installation and User Manual Release: Firmware 2.2.8C / E 2.2019...
  • Page 2 Overview The Kindermann Klick & Show K-10S is a modern Wireless Presentation System for small to mid-sized meeting rooms, classrooms and huddle spaces. Klick & Show allows users to share content from their laptops or mobile devices in a simple way – with no configuration, no cables and without wasting time. Windows/Mac users simply connect the Klick &...
  • Page 3 Main features Wireless transmission of Windows or Mac laptops / PCs to a central screen   Can transmit PC’s mirror/extended windows-desktop (depending on the operating system, Klick & show "Extension Display" driver may be required) or mirror of Macbook desktop to the Base-unit Preview function of connected laptops (max.
  • Page 4 Accessory: Klick+Show TOUCH T1 Transmitter (7488000301) Sensor-button for expansion of Klick & Show K-10S Kit Klick+Show TRAY (7488000303) Tray for four Sensor-Buttons TOUCH Klick+Show USB-C Cap (7488000304) USB Typ-C adapter for use with Klick & Show TOUCH Transmitters at USB-C port at PCs/Mac.
  • Page 5 WARNING Please read the instructions carefully and store them  The Kindermann Klick & Show K-10S can only be operated with a safety low voltage via the  associated power supply unit The device must only be stored and used in a dry, closed environment without mechanical stress ...

  • Page 6: Table Of Contents

    Contents 1. Overview ....................... 10 Action chart ............................10 Network-Integration: ........................... 11 1.2.1 Standard (Direct-mode) ......................11 1.2.2 Standard with existing Access Point (Infrastructure-mode) ........... 11 2. Device Setup ....................12 Connections and Buttons ........................12 2.1.1 Front Panel ............................ 12 2.1.2 Rear Panel .............................
  • Page 7 Mirroring of the desktop - First steps ..................28 4.3.1 PC / Laptop ........................... 28 4.3.2 Mobile Devices ..........................29 5. Settings in Main-menu ................31 Ethernet ..............................32 5.1.1 IP address ............................32 5.1.2 Ethernet MAC address ......................... 32 5.1.3 Proxy &...
  • Page 8 5.5.5 Clear History after meeting ......................43 5.5.6 Change admin password......................44 Language & input ..........................44 System Update ............................. 44 Date & Time ............................46 About Device ............................46 6. Operate Klick & Show.................. 46 Mirroring PC desktop .......................... 46 6.1.1 Extended Desktop for Windows 10 ...................
  • Page 9 Dimensions ............................79 Open Source-Software provisions ...................... 80 EG-declaration ............................82 10. Trouble Shooting ..................83...

  • Page 10: Overview

    1. Overview Name Description Klick & Show Base-unit Host / Base-unit with WiFi receiver Sensor-button with WiFi transmitter for PC/Laptop to share the Sensor-button TOUCH desktop/extended desktop App for smart android devices to share the screen, transmit WirelessMedia for Android photos/music/video/files, exchange files, “Remote View”...

  • Page 11: Network-Integration

    Network-Integration: 1.2.1 Standard (Direct-mode) 1.2.2 Standard with existing Access Point (Infrastructure-mode) • Function depends on the infrastructure of the network in the company. Access to the GUEST-AP may be blocked by firewall settings in the company network...

  • Page 12: Device Setup

    2. Device Setup 2.1 Connections and Buttons Overview Front panel  Rear Panel  Sensor-button TOUCH  2.1.1 Front Panel Name Description USB port, for Klick & Show TOUCH pairing, mouse Front USB connector control, USB touch screen, firmware upgrading STANDBY-LED STANDBY-mode: green LED (2) flashing POWER button...

  • Page 13: Rear Panel

    Via this USB Port you can create a USB Stick containing the Starter-Program-Software for the Sensor-  button TOUCH POWER button The button at the front of the Base-unit has a power on/off function once the Base-unit is powered. Pressing the Button switches the unit on and off in Deep-Standby: the Base-unit shuts down completely, WiFi is deactivated, and can only be turned on by the POWER button.

  • Page 14: Factory Reset

    2.1.3 Factory Reset On pressing the Reset button, a Hardware-reset is initiated at Base-unit. A „FACTORY RESET“, can also be performed via the menu „System Update“ / „Factory Reset”, see chapter 5.7. Both types will be set the unit back to default. All data of configuration will be lost.
  • Page 15 Factory settings after Reset Ethernet  Proxy: None IP setting: DHCP Tethering & portable access point  Portable Wi-Fi access point: WiFi access point Auto-On: Show SSID and PASSWORD in Mainscreen when mirroring: SSID: KlickandShow-xxxx,  Security: WPA2 PSK  Frequency: 5 GHZ ...

  • Page 16: Sensor-Button Touch

    Sensor-Button TOUCH The Klick & Show Sensor-button TOUCH is a dongle, which is used for extending or mirroring the desktop from a personal PC or MAC desktop to the Base-unit and the main screen in a meeting. Newer (Mac) computers with USB-C interface can be connected via an optional adapter (7488000304).

  • Page 17: User Interface

    User Interface 2.3.1 Home screen The following picture shows Home screen of Klick & Show. Connect an input device (mouse, touch) to either USB port to navigate in the menu. Name Description WiFi-indicator WiFi access point is activated or deactivated WiFi name or device name of the Base-unit access point WiFi-password of Base-unit PASS...
  • Page 18 Show time, if LAN has access to a time server; even after TIME disconnecting the LAN connection, the time is displayed until the device has been disconnected from power Security level 1-3, display ONLY; the security features of the Security level displayed level are displayed in detail by clicking on the symbol;...

  • Page 19: Installation

    3. Installation Installation methods for the Base-unit The Base-unit can be placed on a table in meeting room or be mounted on the wall. The antennas are removable. They can rotate or tilt for better wireless connection. Note: For optimum function, install the Base-unit near monitor. Avoid obstacles between Sensor-button TOUCH and Base-unit.

  • Page 20: Wiring Diagram Base-Unit

    The antennas should be installed far enough (at least 50cm/1.6ft) from metallic surfaces to avoid  unwanted reflections and far enough (at least 1m/3.3ft) from other radio equipment that operates in the same frequency range, e.g. other Wi-Fi access points, cordless telephone, microwave ovens,…. It is also best to install antennas at least 15 cm (6 inches) from concrete walls.

  • Page 21: Video Connection

    Adapter types Choose the appropriate power plug for your country (see www.iec.ch/worldplugs.) and slide it in power supply Connect the power adapter with the Base-unit. Connect the power cable plug into the wall outlet. TYP A (USA, Japan) Typ C (EU, except UK) Typ G (UK etc.) Typ I (Australia) Note: Once the Base-unit is powered, it starts up (booting).

  • Page 22: Audio Connection

    Audio Connection The WiFi of Sensor-button TOUCH transmits the audio output of the PC/Laptop, re-direct and send to the Base- unit together with the video signal. The audio will be output at line levels from mini jack socket 3.5 mm connector and via the HDMI output connectors simultaneously.

  • Page 23: Lan Connection

    Note: If there is no sound, it can have different causes, for example: Check the volume control on your laptop's taskbar; see in "Mixer" if "WirelessMedia" or "Video Playback" is activated. To keep the internal speaker of PC/Lap muted while route the audio to the Base-unit, use the audio mute icon in the status bar.

  • Page 24: Usage Of Usb Devices

    LAN indicator LAN “connected” or “disconnected” is shown briefly in a message in lower/right corner on the Home screen. Usage of USB devices Please use a USB Mouse or Touchscreen: 1. For configuration of Klick & Show, 2. To control the sharing PC/Laptop („Remote-Control“ can be blocked in settings), 3.

  • Page 25: Getting Started With Klick & Show

    4. Getting started with Klick & Show Mobile units: Wireless Connection Download the application namely “WirelessMedia” (for example scan QR-Code in Home screen) in Android Play Store or Apple App Store or download it from website https://www.klickandshow.com/ “WirelessMedia” provides two ways to discover the Klick & Show: 1.

  • Page 26: Enable Lan Connection

    4.1.2 Enable LAN Connection Be sure the Klick & Show is connected to the Network. When Local IP shows an active IP address, such for example like 192.168.3.1, it indicates the Base-unit is successfully connected to the LAN and get an appointed IP address.

  • Page 27: Pairing Sensor-Button With Base-Unit

    Pairing Sensor-button with Base-unit Connect the USB-connector of Sensor-button TOUCH to either of one USB port of Base-unit, to pair both units at same WiFi. Follow all OSD messages. A successful pairing is shown at OSD and static red LED. Then, please disconnect the Sensor-button TOUCH and use it for the mirroring on your laptop.

  • Page 28: Mirroring Of The Desktop - First Steps

    Mirroring of the desktop - First steps More detailed instructions for operation can be found in chapter 6.1 4.3.1 PC / Laptop When you are using Klick & Show for the first time on your laptop or for guests, you have to copy the Starter- program first on your Laptop / PC.

  • Page 29: Mobile Devices

    7. Click the Sensor-button or with mouse the symbol at screen, to start mirroring the desktop on the main screen, LED is static red. An OSD message shows: logged in user name (option) and status of “Remote Control” and “Remote View” of desktop (locked/unlocked). 8.
  • Page 30 2. Click the right device to connect. Android 3. After complete the pairing, it shows OSD “Welcome ***” on the Home screen. For example, it shows a „Welcome iPhone”, as shown below (here „Welcome iPad“). 4. With AirPlay technology, user can stream his screen or music, (YouTube-) videos, pictures … wireless to Base-unit.

  • Page 31: Settings In Main-Menu

    5. Settings in Main-menu Connect a mouse to the Base-unit. Click the cogwheel icon on the top right corner, to open the settings menu. A password is required to enter the configuration menu. The default password at delivery or after Reset is “admin”.

  • Page 32: Ethernet

    Ethernet 5.1.1 IP address Shows the local IP address of Base-unit. Mobile devices can also connect to the internet via the LAN port. 5.1.2 Ethernet MAC address Shows the static MAC address of the Base-unit. The MAC Address clearly designates the hardware of each individual network device.

  • Page 33: Pppoe Settings

    5.1.4 PPPoE settings Click to configure the PPPoE (Point-to-Point Protocol over Ethernet) settings. PPPoE Setting: User name: Fill in the appropriate user name.  Password: Fill in the right password for this user.  Check box to choose “Save Account and Password” and “Show Password”. ...

  • Page 34: Wifi Access Point Auto-On - Automatic Turn On Of Wifi, When The Unit Is Powered On

    5.2.2 WiFi access point Auto-On - Automatic turn on of WiFi, when the unit is powered on. 5.2.3 Show Wi-Fi name and Wi-Fi password in main screen Name (SSID) and WiFi-password can be shown or hided at top status-line of main screen. Note: The picture of the external HDMI input is not shown.

  • Page 35: Auto Change Wi-Fi Access Point Password

    with a WiFi analyser, see chapter 5.2.5. Some mobile devices will only apply to one GHz band. Default is band 5 GHz, channel 40. If the Wi-Fi channel is changed, no new coupling of the sensor buttons is necessary. 5.2.5 Auto change Wi-Fi access point password Authentication with a password secures the connection of wireless LAN for authorized users only.

  • Page 36: Wi-Fi Analyzer

    Even a switched-off mobile unit can hold a WiFi-connection to Klick and Show in the background, and inhibit the automatic password-change and/or going to Standby-mode! Tip: If the adjustable password timer in Home screen is not running at least one participant is still connected. A change of WiFi-password does only affect the user of mobile units, NOT the sensor-button TOUCH! Every new WiFi network name SSID needs a new re-pairing of all Sensor-button TOUCH, see chapter 4.2.
  • Page 37 Basic rules to set up the WLAN of Klick & Show Ask your IT department for help when planning larger installations, possibly even on different floors. Most devices are in the 2.4 GHz band. To prevent devices from interfering with each other in one place, you should avoid a frequency range that is 3 or more channels higher.

  • Page 38: Moderator Control

    Moderator Control 5.3.1 Preview window A sub-window of screen content of every connected Sensor-button TOUCH can be switched on or off in the menu. At touch-screen or with mouse of base-unit, you can click on LEFT or RIGHT-arrow (2), to show the small preview-windows as a bar on the right edge of the screen, or to hide them, if they are disturbing.

  • Page 39: General Settings

    Principle illustration: As soon as speaker or moderator is clicking with mouse of base-unit, or clicking with finger at touch-screen, the appropriate participants of the meeting is activated, another click at the arrow shows his picture at the main screen in full format. A red frame is shown for the active picture. General settings Includes: automatic creation of Starter-program on an USB-stick, Standby, AirPlay screen quality, HDMI output resolution, mode of HDMI input, individual Home screen, volume at display.

  • Page 40: Auto Standby

    5.4.2 Auto Standby If the Auto Standby mode is activated, Klick & Show will automatically switch to power saving mode, a selectable time after the last Sensor-button TOUCH was plugged off, or WiFi of a mobile unit was disconnected, there is no active signal at external HDMI-input, or there is no operation at the system.

  • Page 41: Hdmi Input Auto Switch

    5.4.5 HDMI input AUTO switch You can set, if HDMI-signal at HDMI-input of Base-unit is active, main screen is switched manually, automatically or with changing of status of Sensor-button TOUCH the wired HDMI source is displayed. User can select three options: “Manual switching”...

  • Page 42: Security Level

    5.5.1 Security level Based on user requirements, three different security levels can be set in the menu of Klick & Show, to satisfy different security requirements, according to different security sensitive environments or security policies. A security level is a predefined set of settings, which are automatically set, when a level is selected. Click on the corresponding entry in the menu if you want to adjust the respective security features.

  • Page 43: Lan Discovery & Connection

    5.5.2 LAN discovery & Connection Allow the PC/Mobile/tablet to discovery the Klick & Show unit in LAN and connect it, instead by WiFi. For example, a guest may connect through the guest WiFi in a company. If Klick & Show is also integrated into this guest network, the guest can also connect with Click &...

  • Page 44: Change Admin Password

    5.5.6 Change admin password Change admin password for entering setting menu. Default password, or after a RESET, is “admin”. You can change the password, as you like. Click to open on-screen keypad and enter signs. You can also deactivate the password entry, set the appropriate checkmark and 'Save'.
  • Page 45 "Automatic Upgrading". Klick & Show automatically searches every night, between 0 and 7  o’clock, for one newer update, that will be automatically loaded and installed. Base-unit will automatically re-boot and display the Home screen. Check the current firmware: “Check for updates”. Note: Klick &...

  • Page 46: Date & Time

    About Device Includes Model number and Software Version. Example: V2.2.8C.K1050 V2.2.8C=Firmware-Version C=K10S K1050=Kindermann-Build 1050 V2.2.8E.K1050 V2.2.8E=Firmware-Version E=K10L Lite K1050=Kindermann-Build 1050 Note: Software version is also shown in User screen, see chapter 7.1. 6. Operate Klick & Show Mirroring PC desktop...

  • Page 47: Extended Desktop For Windows 10

    From firmware version 2.2.6C, you can operate Klick & Show for Windows optionally with or without Sensor- button TOUCH. If there are several participants in a meeting, mixed operation is also possible. The procedure "without Sensor-button TOUCH can be found in chapter 6.1.2. The keyless function for the Mac is under development and will be available in Q1/2019.

  • Page 48: Microsoft Windows Pc / Laptop, Without Sensor-Button Touch

    4. Click the Sensor-button or with mouse the symbol key 'Ready to share' on the screen, LED is static red: the screen is mirrored to the Main screen. An OSD message shows: logged in user name (optional) and whether Remote-desktop control, “Remote Control” and “Remote View”, is locked or unlocked. 5.
  • Page 49 Klick & Show using a network cable. Double-click the "WirelessMedia-windows.exe" starter program , a list of all available Klick & Show in the same network will be displayed, select which device you want to connect to. The connections are password protected (lock icon (LAN connection: several receivers possible) (WiFi: only 1 receiver) Enter the Klick &...

  • Page 50: Options Für Microsoft Windows Pc / Laptop

    6. Click the Sensor-button again, to stop mirroring, LED shows green again. You can minimize the APP-window, in Windows taskbar you can see if screen is mirroring Right click the symbol in Windows-taskbar to open up the context-menu. „About“: You can determine the software versions of the base-unit, the TOUCH sensor key and the ...
  • Page 51 „Options“: Extended Screen: Transfers extended desktop of active source. (depending on your operating system, may require the installation of the virtual driver „ExtendedDesktop“ for function with Windows 10). The primary screen is displayed on the laptop and the virtually extended screen is displayed on the playback monitor. Note: If you select the “Extended Screen”...
  • Page 52 “Remote Control” is not possible for “Extended Desktop”. Keep Aspect Ratio: Keep the original aspect ratio to display on the main screen. HDMI-Input: Enables HDMI-Input at Base-unit. Remote Control Lock: Remote control („Remote Mouse“) of the mouse of active presentation laptop with WirelessMedia App for mobile unit, can be unlocked (no check) / locked (check mark).
  • Page 53 over in configuration menu for all participants. It is effective until another person overwrites it. Note: When "Remote View" is active, the video streaming transmission performance to the main screen may be affected: picture and sound dropouts. Note: Remote View does not transmit audio in the video. Lowest Latency (Mouse): Nativ (no check): the setting is applied individually for this laptop only.

  • Page 54: Mac Os Pc/Laptop, With Sensor-Button Touch

    6.1.5 Mac OS PC/Laptop, with Sensor-button TOUCH You can use Klick & Show for macOS with firmware 2.2.6C only with Sensor-button TOUCH. At least operation system macOS 10.9 is required. When you are using Klick & Show for the first time on your MAC or for guests, you have to copy the Starter- program “WirelessMedia for MAC“...
  • Page 55 4. Click the Sensor-button again, to stop mirroring, LED shows green again. You can minimize the APP-window, in top menu-bar you can see if screen is mirroring or not Right click the symbol in top menu-bar to open up the context-menu. „About“: You can determine the software versions of the base-unit, the TOUCH sensor key and ...

  • Page 56: Optionen Für Apple Macos, Macbook

    6.1.6 Optionen für Apple MacOS, MacBook Click the cogwheel icon in App to open/close “options”. „Options“: Extended Screen: Transmits the Extended desktop (“Use a Separate Display”) only via AirPlay, when activated for Display on Klick & Show. Keep Aspect Ratio: keep the original aspect ratio to display on the main screen.
  • Page 57 Attention! When “Remote View” and “Remote Control”is unlocked, other participants can control the presentation, but also interrupt or do some consciously or unintentionally actions. Therefore, each user of a meeting can configure this setting individually at his laptop, when he is actively sharing his presentation.

  • Page 58: Transmitting Ios Mobile Device

    6.2 Transmitting iOS mobile device 6.2.1 How to use AirPlay? AirPlay: Klick & Show supports "AirPlay" which allows the streaming of the desktop or music, (YouTube-) videos, pictures, … of your Apple device such as iPhone, iPad etc. on the main screen. (Note: iOS devices must first be connected to the WiFi of Click &Show).
  • Page 59 Functional Zone: Local Files: Can transmit the local file, including Photos, Video, Music to the Base-unit for playback.  File Sharing: Can store data (videos, office-files…) inside the iOS APP (prepare data before the meeting),  show data in meeting from mobile device. Data are shown via the internal media-player in Klick & Show. “Remote View”: Shows main screen at mobile device.
  • Page 60 4. File Sharing: Exchange data between a laptop and the mobile unit. The files are stored within the WirelessMedia App in all iOS units, which are connected to Klick & Show. Click the ?-symbol (Help) to get the IP-address in WiFi of Klick & Show for the meeting. Close the window with the cross-icon. To access the files, enter the IP address by our PC/Laptop’s web browser while your PC/Laptop has connected to Klick &...
  • Page 61 Folder list File list Klick „“Remote View“ in menu bar, to control your application with mouse, or edit data with displayed keyboard of WirlessMedia App. All changes can be stored, to capture all results of a meeting. 5. “Remote View”: Control of mouse and keyboard via WiFi. Click the “Remote View” in menu bar to show the main screen of Klick &...
  • Page 62 Click the Red Cross icon to return. 6. Remote Mouse: click the “Remote Mouse”-icon to generate a mouse pointer to control the Klick & Show Base-unit with 3D-movements like an air-mouse. Hold the phone horizontally in front of you, touch Re- Position to center the mouse-pointer and begin with movements out from the wrist.

  • Page 63: Transmitting Android Device Wireless

    Transmitting Android device wireless 6.3.1 “WirelessMedia” Apk for Android Open the “WirelessMedia” application: Note: permit access of photos and pictures, when installing. 2. The main interface of “WirelessMedia” is shown as below. It includes the features including: Android above 5.x Menu Bar (Functional Zone): Local Files: Can transmit the local file, including Photos, Video, Music to the receiver for playback.
  • Page 64 3. Local Files: select the file stored in local Android phone as shown below (Note: at the actual version the memory of internal memory card is not shown). Note: The last displayed image remains in Klick & Show memory, until the unit is turned off. To protect the privacy it is recommended to delete manually the last image, before leaving the meeting.
  • Page 65 When there is no connected Klick & Show, it shows: Operation Zone: Zone to “Remote View” the active signal and control it as a mouse. Hidden Menu: Click to open the hidden function features, including Back and Keyboard when available. Back: It sends a “Return”...

  • Page 66: Hdmi Input Select

    Mouse Pointer: represent the relative position of the mouse on the main screen. Re-Position: reset the positon to be the center of the screen. Back: It sends a “Return” command to the Base-unit to go back to the previous directory menu. Red Cross Icon: return to the main interface of WirelessMedia App.
  • Page 67 The Base-unit can also be configured in menu settings 5.4.5, whether it will switch manually or automatically to an active source at the HDMI-input. Note: A right-click of the mouse button returns to Home screen also.

  • Page 68: Firmware-Update

    7. Firmware-Update An update of the firmware can be useful to take the advantage of new features of Klick & Show or to fix known issues and bugs. Check website www.klickandshow.com/ if there are newer versions of the firmware available. After updating the Base-unit, always check, whether the other parts still fit together or should be updated also.

  • Page 69: Upgrading Firmware Base-Unit

    Upgrading Firmware Base-unit Download the actual firmware from https://www.klickandshow.com/ You need to unzip the file “update.bin” first and copy the updating file to the root directory of the USB drive. Connect the USB drive to either USB port of Base-unit. Note: each port can handle max.

  • Page 70: Upgrading And Pairing Of Sensor-Button Touch

    Perform “Factory Reset”when the firmware update is complete? Only when the associated “Release notes” are requiring an additional „Factory Reset“, perform it via the menu „System Update“ / „Factory Reset”. All data of configuration will be lost. So that you do not have to re-configure all data in an elaborate process, therefore note all settings within the Sub-menus before doing Factory Reset.

  • Page 71: Software Update Of Usb-Stick Of Sensor-Button Touch

    Software update of USB-stick of Sensor-button TOUCH After updating of Base-unit and Sensor-buttons the USB-stick of the Sensor-button TOUCH should be written with the actual STARTER-program for Windows, MAC and Apps for mobile-units. 1. Plug the USB-stick of Sensor-button TOUCH to an USB port of Base-unit. 2.
  • Page 72 There are several possibilities doing this. Best and safest possibility: you can download the Starter-program direct from the web-browser of Base-unit. Note SSID, PASSWORD in status-line of Home screen of Base-unit. Connect your PC with the WiFi of the Base-unit. Open a Browser on your PC and enter WiFi-IP http://192.168.43.1:8000 see webpage of Base- unit below:...

  • Page 73: Clean Left Files Of Older Versions Of Starter-Program In Laptop

    Clean left files of older versions of Starter-program in Laptop If you still get an error-message, when connecting the Sensor-button TOUCH, although all programs have been updated, it may possible that there are some old version “WirelessMedia” files left in the laptop, which may influence the performance of the newer “WirelessMedia”...

  • Page 74: Tcp/Ip Befehle: Telnet

    Go to step 1. and repeat deleting all „WirelessMedia“ Programs, if necessary. Execute the actual version of STARTER-program. Upgrading progress is completed. 8. TCP/IP Befehle: Telnet Com’d Command Command Response Effect Command Parameter Example hdmi switch screen to hdmi hdmi on input switch screen to hdmi off...
  • Page 75 param1: mac param2: ip amount #wifi 2 return how many wifi wifi device which are amount connected to wifi access point #wifi ap-on 10 ty56rytt 234324rtyuu query wifi access wifi ? point settings param param1: ap-on means wifi access point is on off means wifi access point is off param2: wifi access...
  • Page 76 working, sleep means system is dreaming button listconnected #button 1513849033 list connected button c0a82b98,8:ea:40:5d:24:66,V2.0.5C.A1009,1,1,0,1513848909,1513848845,15138 info 48213,ter #button 1513849033 the same as c0a82b85,ec:3d:fd:3a:9c:2c,V2.0.5C.A1009,1,1,0,1513849008,1513849006,0,LYC listconnected listdisconnect #button 1513849033 list buttons which had c0a82b85,ec:3d:fd:3a:9c:2c,V2.0.5C.A1009,1,1,0,1513849008,1513849006,0,LYC ever connected to base-unit. These info won't be saved to disk, so when the power of base-unit is cut off, these info will...

  • Page 77: Specifications Klick & Show

    9. Specifications Klick & Show Klick & Show TOUCH Klick & Show K-10S / K-10L Lite Input Formats Sensor-Button Base-Unit Video input format 1x USB 1x Wireless, 1x HDMI-IN Video compliance / connector USB 2.0 with type A connector IEEE 802.11n/ac, HDMI 2.0 with 19-pin female connector Video input resolution VESA, maximum 4096 x 2160* pixels HDMI 2.0, up to 4K/60Hz/4:4:4...
  • Page 78 Control Operation Sensor button with tactile response Virtual buttons on OSD for USB mouse or touch display, (vibration) “Remote Control” with mobile device via iOS/Android Status indicator 3 color back-lit LEDs: Red, Green, White* On-Screen-Display menu (OSD) * reserved for future use for configuration and information overlay Control protocol Telnet, via Ethernet port...

  • Page 79: Dimensions

    Dimensions...

  • Page 80: Open Source-Software Provisions

    "LicenseMatters.txt", which is included with the download software, to find. Within at least three (3) years after receiving the Kindermann Firmware, you and any third party may obtain a copy of the source code of the software components falling under the scope of an Open Source license.
  • Page 81 In the development of the Software, the following Open Source Software components have been used: Package Version License Download URL vmlinux 3.10.40 http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git busybox v1.19.2 http://www.busybox.net/ [libc] [libc] [libc] libc glibc : glibc : LGPL glibc : http://www.gnu.org/software/libc/ 2.16(ARM) cares 1.7.3 https://c-ares.haxx.se/ curl...

  • Page 82: Eg-Declaration

    EG-declaration The full text of the EU Declaration of conformity is available at the following internet address: Hereby Kindermann GmbH declares that the radio equipment type Klick & Show is in compliance with the Directive 2014/53/EU. Klick & Show is restricted for use indoor, when operation in 5 GHz band 2.4 GHz frequency band: channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11;...

  • Page 83: Trouble Shooting

    10. Trouble Shooting Here you can find some fundamental problems and possible causes, which can be happen during the use of Klick & Show. Find out the problem you have encountered in the table below and apply the solution. If you still have difficulty, contact your technical support, your dealer or your IT-administrator. Problem Cause Solution...
  • Page 84 also chap. 7.4, 7.5. To start the program faster, we recommend setting up a shortcut on the desktop. Windows: Check in Task Manager if  Executing of *.exe file is blocked from “WirelessMediaMain.exe” is administrator or from antivirus running. software. Connect Sensor-button TOUCH to ...
  • Page 85 Bad connection at USB port on the Reconnect to the USB port.  Laptop. Try another USB port.  Reboot the Laptop.  OSD-message: “Firmware Launcher is Software-version of Starter-program Normally you can click away the  not compliant!” does not fit to current firmware. message, to be able to work with the basic functions (mirroring …).
  • Page 86 Metal cabinets, walls, construction Change the orientation of the  elements, …can cause reflections antennas at Base-unit. deteriorating the wireless signal Remove or limit as much as  possible all obstacles between the Obstacles between Buttons and Base- buttons and Base-unit. unit cause lowering of the wireless Avoid to place the Base-unit in ...
  • Page 87 The Base-unit is in standby mode, Push the standby button on the Base- “Power-LED” is flashing at Base-unit. unit or power off and on again the Base-unit or insert a Sensor-button Power-supply is missed. and touch. Your content is removed from the Connection to Base-unit is lost.
  • Page 88 The WirelessMedia driver adds a new This behavior can not be changed on audio USB output device in Device the various Windows operating Manager. Audio is transferred to the systems. Klick & Show main screen via this output device. If you stop the transmission, the internal laptop speaker has no sound at Win10, at Win7 the internal speaker becomes...
  • Page 89 There is no sound at main-screen, Due to the limit of the Android system, On the main page of the App use the when mirroring a video by the Android doesn’t provide an interface "Local Files" function to transfer files “WirelessMedia for Android“.
  • Page 90 TOUCH button clicking the cross "X" in the upper right "Exit". has been inserted corner. 7488000300 / 7488000305 2019-2 / 844 005 Änderungen vorbehalten / Subject to alterations Kindermann GmbH · Mainparkring 3 · D-97246 Eibelstadt · E-Mail: info@kindermann.de · www.kindermann.com...

Table of Contents