Page 1 Wireless Presentation Solution Klick & Show K-10S Art.-Nr. 7488000300 Klick & Show K-10L Lite - Art.-Nr. 7488000305 Installation and User Manual Release: Firmware 3.0.6 C / E 5.2019...
Page 2: Antenna
Overview The Kindermann Klick & Show K-10S is a modern Wireless Presentation System for small to mid-sized meeting rooms, classrooms and huddle spaces. Klick & Show allows users to share content from their laptops or mobile devices in a simple way – with no configuration, no cables and without wasting time. Windows/Mac users simply connect the Klick &...
Page 3 Main features Wireless transmission of Windows or Mac laptops / PCs to a central screen   Can transmit PC’s mirror/extended windows-desktop (depending on the operating system, Klick & show "Extension Display" driver may be required) or mirror of Macbook desktop to the Base-unit (extended desktop is possible via AirPlay) Preview function of connected laptops (max.
Page 4: Warning
Accessory: Klick+Show TOUCH T1 Transmitter (7488000301) Sensor-button for expansion of Klick & Show K-10S Kit Klick+Show TRAY (7488000303) Tray for four Sensor-Buttons TOUCH Klick+Show USB-C Cap (7488000304) USB Typ-C adapter for use with Klick & Show TOUCH Transmitters at USB-C port at PCs/Mac. Safety instructions WARNING Table of contents...
Page 5 Please read the instructions carefully and store them  The Kindermann Klick & Show K-10S can only be operated with a safety low voltage via the  associated power supply unit The device must only be stored and used in a dry, closed environment without mechanical stress ...
Page 6: Table Of Contents
Contents 1. Overview ..........................10 Action Chart ..............................10 Network-Integration: ..........................11 1.2.1 Standard (Direct-mode, Guest or Staff) ....................11 1.2.2 Standard with existing Access Point (Direct-mode) ................11 2. Device Setup ........................12 Connections and Buttons ........................12 2.1.1 Front Panel ...............................
Page 7: Table Of Contents
4.3.2 Mobile Devices ..............................30 4.4. Whiteboard & Annotation......................... 32 4.4.1 Whiteboard ............................... 33 4.4.2 Annotation ................................ 34 Settings in Main-menu ..................... 36 Ethernet ................................ 37 5.1.1 IP address ................................. 37 5.1.2 Ethernet MAC address ............................ 37 5.1.3 Proxy & IP settings ............................37 5.1.4 PPPoE settings..............................
Page 8: Table Of Contents
5.5.1 Security level ..............................57 5.5.2 LAN discovery & Connection ......................... 58 5.5.3 “Remote View” lock ............................59 5.5.4 Show PC’s user status when mirroring (Yes/No) : ..................59 5.5.5 Clear History after meeting ..........................59 5.5.6 Change admin password ..........................60 Language &...
Page 9: Table Of Contents
Clean left files of older versions of Starter-program in Laptop ............91 8. TCP/IP Commands: Telnet ....................92 9. Specifications Klick & Show ..................... 93 Dimensions ..............................95 Open Source-Software provisions ......................96 EG-declaration ..............................98 10. Trouble Shooting ....................... 99 Table of contents...
Page 10: Overview
1. Overview Name Description Klick & Show Base-unit Host / Base-unit with Wi-Fi receiver Sensor-button with Wi-Fi transmitter for PC/Laptop to share the Sensor-button TOUCH desktop/extended desktop App for smart android devices to share the screen, transmit WirelessMedia for Android photos/music/video/files, exchange files, “Remote View”...
Page 11: Network-Integration
Network-Integration: 1.2.1 Standard (Direct-mode, Guest or Staff) 1.2.2 Standard with existing Access Point (Direct-mode) • Function depends on the infrastructure of the network in the company. Access to the GUEST-AP may be blocked by firewall settings in the company network. Table of contents...
Page 12: Device Setup
2. Device Setup 2.1 Connections and Buttons Overview Front panel  Rear Panel  Sensor-button TOUCH  2.1.1 Front Panel Name Description USB port, for Klick & Show TOUCH pairing, mouse Front USB connector control, USB touch screen, firmware upgrading STANDBY-LED STANDBY-mode: green LED (2) flashing POWER button...
Page 13: Rear Panel
Via this USB Port you can create a USB Stick containing the Starter-Program-Software for the Sensor-  button TOUCH POWER button The button at the front of the Base-unit has a power on/off function once the Base-unit is powered. Pressing the Button switches the unit on and off in Deep-Standby: the Base-unit shuts down completely, Wi-Fi is deactivated, and can only be turned on by the POWER button.
Page 14: Factory Reset
2.1.3 Factory Reset On pressing the Reset button, a Hardware-reset is initiated at Base-unit. A „FACTORY RESET“, can also be performed via the menu „System Update“ / „Factory Reset”, see chapter 5.7. Both types will be set the unit back to default. All data of configuration will be lost.
Page 15 Factory settings after Reset Ethernet  Proxy: None IP setting: DHCP Tethering & portable access point  Wi-Fi-Network mode: Wi-Fi Direct mode, connected DUAL network SSID: KlickandShow-xxxx,  Password: 0000xxxx  Guest-SSID: SSID Klick & Show-xxxx  STAFF-SSID: Staff SSID ...
Page 16: Sensor-Button Touch
Sensor-Button TOUCH The Klick & Show Sensor-button TOUCH is a dongle, which is used for extending or mirroring the desktop from a personal PC or MAC desktop to the Base-unit and the main screen in a meeting. Newer (Mac) computers with USB-C interface can be connected via an optional adapter (7488000304).
Page 17: User Interface
User Interface 2.3.1 Home screen The following picture shows Home screen of Klick & Show. Connect an input device (mouse, touch) to either USB port to navigate in the menu. Name Description Wi-Fi Direct mode: internal access point is enabled Wi-Fi Infrastructure mode: „Client-Mode“...
Page 18 Wi-Fi name or device name of the Base-unit access point PASS Wi-Fi-password of Base-unit Is only displayed, when timer is active; Password-timer time until the password is changed automatically Change Generate new password manually for securing your Wi-Fi network, Wi-Fi-password for example to end the REMOTE-view function of mobile units Status : Connected Dual network (Wi-Fi + LAN)
Page 19 Operating instructions for operation with laptop / Mac, with and Quick Guide without transmitter TOUCH; First time users have to install starter Windows / MacOS program once (16) Load Scan corresponding QR-code for iOS or Android device and „WirelessMedia“- download the App from the Store App from Store Android/IOS Steps to instruct how to transmit smart mobile devices either...
Page 20: Installation
Installation Installation methods for the Base-unit The Base-unit can be placed on a table in meeting room or be mounted on the wall. To avoid damage during transport, the antennas are delivered unassembled. The antennas can rotate or tilt for better wireless connection.
Page 21: Wiring Diagramm Base-Unit
Antenna placement rules The antennas should be oriented vertically.  The antennas should be installed far enough (at least 50cm/1.6ft) from metallic surfaces to avoid  unwanted reflections and far enough (at least 1m/3.3ft) from other radio equipment that operates in the same frequency range, e.g.
Page 22: Video Connection
adapters. Adapter types Choose the appropriate power plug for your country (see www.iec.ch/worldplugs.) and slide it in power supply Connect the power adapter with the Base-unit. Connect the power cable plug into the wall outlet. TYP A (USA, Japan) Typ C (EU, except UK) Typ G (UK etc.) Typ I (Australia) Note: Once the Base-unit is powered, it starts up (booting).
Page 23: Audio Connection
Audio Connection The Wi-Fi of Sensor-button TOUCH transmits the audio output of the PC/Laptop, re-direct and send to the Base- unit together with the video signal. The audio will be output at line levels from mini jack socket 3.5 mm connector and via the HDMI output connectors simultaneously.
Page 24: Lan Connection
As default set, Klick & Show will mute the internal speaker of PC/Laptop and route the audio to the Base-unit, after PC/Laptop is successfully mirroring desktop to the main screen, in order to avoid the repeated audio. When transmission is stopped at Sensor-button, local loudspeaker will return to previous status. Note: If there is no sound, it can have different causes, for example: Check the volume control on your laptop's taskbar;...
Page 25: Usage Of Usb Device
Over-The-Air -Update (OTA) of firmware of Base-unit  maintenance purpose (in preparation)  Telnet commands Telnet is a relatively simple, text-based protocol by which a computer of another person can connect via internet to Klick & Show. Control via TCP/IP (port 5656) is possible. You can find the list of commands in chapter 8. LAN indicator LAN “connected”...
Page 26: Getting Started With Klick & Show
Single click to select  Right-click to back to the Home screen  Touchscreen Single click to select  Long press to open the contextual menus, as double-click or click the right button of a USB mouse.  Getting started with Klick & Show Mobile units: Wireless Connection Download the application namely “WirelessMedia”...
Page 27: Enable Portable Access Point
Guests and staff have access to the internet when LAN is enabled, see 4.1.1. Further options of the configuration for integration into a company network are provided in section 5.1. 4.1.1 Enable portable access point: Make sure Klick & Show is connected to the network. If a local address is displayed on the Home screen, this means: the base device is correctly integrated in the LAN and has received an IP.
Page 28 Then, please disconnect the Sensor-button TOUCH and use it for the mirroring on your laptop. Pair all other buttons in the same way. If error-message “Configuration fail” is shown, please check the connection of USB to keep stable after plug-in, and try again.
Page 29: Pc / Laptop
Mirroring of the desktop First steps More detailed instructions for operation can be found in chapter 6.1 4.3.1 PC / Laptop When you are using Klick & Show for the first time on your laptop or for guests, you have to copy the Starter- program first on your Laptop / PC.
Page 30: Mobile Devices
7. Click the Sensor-button or with mouse the symbol at screen, to start mirroring the desktop on the main screen, LED is static red. An OSD message shows: logged in user name (option) and status of “Remote Control” and “Remote View” of desktop (locked/unlocked). 8.
Page 31 3. Click the right device to connect. Android 4. After complete the pairing, it shows OSD “Welcome ***” on the Home screen. For example, it shows a „Welcome iPhone”, as shown below (here „Welcome iPad“). 5. With AirPlay technology, user can stream his screen or music, (YouTube-) videos, pictures … wireless to Base-unit.
Page 32: Whiteboard & Annotation
4.4. Whiteboard & Annotation Whiteboard and Annotation requires an HID compatible device, such as interactive white board or interactive touch screen. It is easy to use, makes collaboration in your business more productive and effective: documents can be easily written, edited, captured and shared. Note: "Remote View"...
Page 33: Whiteboard
4.4.1 Whiteboard Click on the icon to enter the white Whiteboard page. You can create free drawings with your finger at touch screen, mouse or remotely by a mobile device with the WirelessMedia-APP (multitouch capability). Use the toolbar to select one of the following functions. Icons Function Add an empty page...
Page 34: Annotation
Toolbar 3 will pop up, when “Pen” or “Draw shape” or “Select color of board” is selected, for individual change of size of Pen, Shape or color. Toolbar 4 Save the current screenshot on local storage (PNG+WMN) Close Whiteboard to go back to Home screen, actual project can be saved on local storage (WMN) File options File options:...
Page 35 Use the toolbar to select one of the following functions. Icons Function Undo: one step backward in changes Redo: one step forward in changes Erase part of drawings or annotation, change diameter by a longer tap Clear the entire drawing/writing on the screen Toolbar 1 Pen allows writing/drawing in different colors Draw basic geometric shapes...
Page 36: Settings In Main-Menu
5. Settings in Main-menu Connect a mouse to the Base-unit. Click the Settings-icon on the top right corner, to open the menu. A password is required to enter the configuration menu. The default password at delivery or after Reset is “admin”.
Page 37: Ethernet
Ethernet 5.1.1 IP address Shows the local IP address of Base-unit. Mobile devices can also connect to the internet via the LAN port. 5.1.2 Ethernet MAC address Shows the static MAC address of the Base-unit. The MAC Address clearly designates the hardware of each individual network device.
Page 38: Pppoe Settings
5.1.4 PPPoE settings Click to configure the PPPoE (Point-to-Point Protocol over Ethernet) settings. PPPoE Setting: User name: Fill in the appropriate user name.  Password: Fill in the right password for this user.  Check box to choose “Save Account and Password” and “Show Password”. ...
Page 39 The SSIDs for these hotspots are shown in the Home screen of Klick & Show, see example: Guest and Staff have access to the internet. You can start using Klick & Show in this mode without any other wireless network configuration. Wireless network configuration To take the full benefits of the Klick &...
Page 40: Wireless Network Configuration Wizard
5.2.1 Wireless network configuration wizard The Assistant guides you through the network configuration. Enter a device name for the Base-unit. We recommend to take a descriptive name, if you have more than one Klick & Show installed. The default name is “KlickandShow-xxxx”. Double click in ‘name’, to enable the on-screen virtual keyboard.
Page 41 The LAN-Port of Base-unit is not connected. The PC-users can present with or without dongle TOUCH by WirelessMedia PC driver (Windows or MacOS). Android and iOS users (BYOD) can share their content by installing the free APP on their device or using AirPlay (Apple only). Recommended Environment This option is best for temporary operation, small installations, and rooms without network access or networks that do not allow network access for Guests, due to strict security concerns, and are completely separate from...
Page 42 Note: Klick & Show button TOUCH supports 2.4 GHz- and 5 GHz-band. The 2.4 GHz-band has a higher range; the 5 GHz-band is less sensitive to interferences. Please check the surroundings which frequencies and channels are used, for example with a Wi-Fi analyzer, see chapter 5.2.5. Some mobile devices will only apply to one GHz band.
Page 43 Click “Next” to enter the Staff-SSID for the secure wireless network of employees. This information will be shown at Home screen of Klick & Show. Click “Next” to get the information for re-pairing the dongle TOUCH with the Base-unit. Click OK to finish the configuration wizard. Table of contents...
Page 44: Wireless Infrastructure Mode
Segmented dual network Guest and Staff use the internal Wi-Fi access point of Base-unit to present with all their units. No Internet access is required. The LAN-Port of Base-unit is not connected. The PC-users can present with or without dongle TOUCH by WirelessMedia PC driver (Windows or MacOS).
Page 45 Klick & Show can connect to a wired and a wireless network simultaneously. The basic unit is firmly connected to the company network with LAN. Guest users connect to Wi-Fi "Guest" access. The employees (“Staff”) connect to their usual access point of the corporate network, without having to change the Wi-Fi. This is very useful for organizations, which have a wireless “Guest”...
Page 46: Lan Infrastructure Mode
Follow the instructions of the configuration wizard for “Wireless infrastructure mode”. When pairing the dongles, by plugging the dongle in the USB port of the Base-unit, it will automatically pair to the associated access point of Guest or Staff Wi-Fi and NOT to Klick & Show. Note: Two wireless transmissions between PC and Base-unit may influence the performance.
Page 47: Firewall Settings
The dongle TOUCH and/or the mobile devices can connect to the secured wireless access point of the company network. The Base-unit of Klick & Show is hard-wired connected via LAN to the Ethernet of the Company network. The Staff-users connect to their usual access point of Company network, without the need to change the Wi-Fi. Follow the instructions of the configuration wizard for “LAN infrastructure mode”.
Page 48 Usage Description From Protocol Direction PC:Port is assigned by windows/MAC; Transfer control command between Transmitter/PC software and  port is 20000 Command Transmitter-Port Base-unit is assigned by system PC:Port is assigned by windows/MAC;  port is 20002 Video Transfer video from Transmitter /PC software to Base-unit Transmitter-Port is assigned by system PC:Port is assigned by...
Page 49  From apple device port is 51020 Airplay Airplay protocol event port Airplay protocol random assign an UDP port for connected apple  From apple device random port Airplay device to transfer audio From apple device/Mobile  port is 51030 Airplay /Mobile APP Transfer video data, for screen mirror app(ios/Android) Mobile...
Page 50: Network Configuration Diagram
5.2.1.5 Network Configuration Diagram Wireless Network configuration wizard Enter Device Name  SSID (Wi-Fi Direct Mode)  ID (Infrastructure Mode) Select Mode Network config WLAN Direct Mode  Setup Wi-Fi Access-Point of LAN Infrastructure Mode Klick & Show (Frequency, channel, password) ...
Page 51: Show Wi-Fi Name And Wi-Fi Password In Main Screen
5.2.2 Show Wi-Fi name and Wi-Fi password in main screen Name (SSID) and Wi-Fi-password can be shown or hided at top status-line of main screen. Note: The picture of the external HDMI input is not shown. 5.2.3 Auto change Wi-Fi access point password Authentication with a password secures the connection of wireless LAN for authorized users only.
Page 52: Wi-Fi Analyzer
A new Wi-Fi-password for securing your Wi-Fi network can be generated also manually by pushing in Home screen, also see chapter 2.3.1. Even a switched-off mobile unit can hold a Wi-Fi-connection to Klick and Show in the background, and inhibit the automatic password-change and/or going to Standby-mode! Tip: If the adjustable password timer in Home screen is not running at least one participant is still connected.
Page 53 Basic rules to set up the WLAN of Klick & Show Ask your IT department for help when planning larger installations, possibly even on different floors. Most devices are in the 2.4 GHz band. To prevent devices from interfering with each other in one place, you should avoid a frequency range that is three or more channels higher.
Page 54: Moderator Control
5.3 Moderator Control 5.3.3 Preview window A sub-window of screen content of every connected source can be switched on or off in the menu. At touch-screen or with mouse of Base-unit, you can click on LEFT or RIGHT-arrow (2), to show the small preview-windows as a bar on the right edge of the screen, or to hide them, if they are disturbing.
Page 55: General Settings
As soon as speaker or moderator is clicking with mouse of Base-unit, or clicking with finger at touch-screen, the appropriate participants of the meeting is activated, another click at the arrow shows his picture at the main screen in full format. A red frame is shown for the active picture. General settings Includes: automatic creation of Starter-program on an USB-stick, Standby, AirPlay screen quality, HDMI output resolution, mode of HDMI input, individual Home screen, volume at display.
Page 56: Airplay Screen Quality
active signal at external HDMI-input, or there is no operation at the system. Time is selectable from Never to 30 minutes. In Standby green LED (2) in window of front of Base-unit is flashing and HDMI-output is switched off. When a Sensor-button TOUCH is plugged in and connected, or a mobile unit is connected, or an active signal is at external HDMI-input, Standby is deactivated.
Page 57: Background Image Home Screen
“Last connect switch”, switch to HDMI-IN, when Base-unit detects active HDMI signal, auto-switch to  Home screen, when HDMI signal at input is inactive. “Switch to active HDMI input when Home screen is shown longer than 5 sec:” when sensor button is ...
Page 58: Lan Discovery & Connection
regular meeting room etc. Level 2: higher security; provides increased security for companies, organizations, government agencies, etc., through powerful encryption of audio and video data; other security features include limiting the transmission of "AirPlay" by introducing a password and blocking the "Remote View" feature for mobile devices. Level 3: is used for strict security requirements of companies, organizations, authorities, banks.
Page 59: Remote View" Lock
5.5.3 “Remote View” lock Presenter is able to turn on/off the “Remote View”, to enable/disable the Klick & Show APK/App to remotely watch the main screen (mirrored screen), for example with “Remote View” of WirelessMedia App in Wi-Fi (or LAN in same network).
Page 60: Change Admin Password
5.5.6 Change admin password Change admin password for entering setting menu. Default password, or after a RESET, is “admin”. You can change the password, as you like. Click to open on-screen keypad and enter signs. You can also deactivate the password entry, set the appropriate checkmark and 'Save'.
Page 61: Date & Time
"Automatic Upgrading". Klick & Show automatically searches every night, between 0 and 7  o’clock, for one newer update, that will be automatically loaded and installed. Base-unit will automatically re-boot and display the Home screen. Check the current firmware: “Check for updates”. Note: Klick &...
Page 62: About Device
Choose date format: Click to select the data format.  5.9 About Device Includes Model number and Software Version. Example: V2.2.8C.K1050 V2.2.8C=Firmware-Version C=K10S K1050=Kindermann-Build 1050 V2.2.8E.K1050 V2.2.8E=Firmware-Version E=K10L Lite K1050=Kindermann-Build 1050 Note: Software version is also shown in User screen, see chapter 7.1. Table of contents...
Page 63: Operate Klick & Show
6. Operate Klick & Show Mirroring PC desktop standard AutoRun-Starter program of “WirelessMedia for Windows“ is designed for maximum user- friendliness: when plugging in the TOUCH sensor button into the computer's USB port, the driver starts automatically. No admin rights are required to run and install the Starter program "WirelessMedia for Windows".
Page 64 When Starter-program „WirelessMedia-windows.exe“ is not yet been installed on PC, please proceed, as is explained in chapter 7.4, 7.5. 1. Plug a Sensor-button TOUCH to the USB port of your PC or Laptop. The Klick & Show application is starting automatically and a symbol is displayed in the task bar of the PC/laptop (If necessary, first click on the icon arrow "up"...
Page 65: Microsoft Windows Pc / Laptop, Without Sensor-Button Touch
„Exit“: end APP. Exiting the App completely.  If you click the cross "X" in the upper right corner of the app, the app in the task bar is only minimized and can be recalled again from the taskbar at any time. 5.
Page 66 You can also manually connect by entering the name (SSID) or IP address. (click icon If the Base-unit is not in the same network segment as the mobile device provide a bridge from one network to the other or enter the IP address of Klick & Show manually and click Enter the corresponding Klick &...
Page 67: Options Für Microsoft Windows Pc / Laptop – Extended Screen
If you click the cross "X" in the upper right corner of the app, the app in the task bar is only minimized and can be recalled again from the taskbar at any time. 6.1.4 Options für Microsoft Windows PC / Laptop – Extended Screen Click the gear icon in App to open/close “options”.
Page 68 (Pause), Windows remains in " Extended Mode" until you press "Windows key + P" on the laptop to select the "PC screen only" mode. “Remote Control” is not possible for “Extended Desktop”. Keep Aspect Ratio: Keep the original aspect ratio to display on the main screen. HDMI-Input: Enables HDMI-Input at Base-unit.
Page 69 overwrite it for all users, when he is actively sharing his presentation. Otherwise setting cannot be changed (greyed out). The setting is taken over in configuration menu for all participants. It is effective until another person overwrites it. Note: When "Remote View" is active, the video streaming transmission performance to the main screen may be affected: picture and sound dropouts.
Page 70: Mac Os Pc/Laptop, With Sensor-Button Touch
6.1.5 Mac OS PC/Laptop, with Sensor-button TOUCH As from firmware 3.0 you can use Klick & Show for macOS without Sensor-button TOUCH too, see chapter 6.1.6.. At least operation system macOS 10.9 is required. When you are using Klick & Show for the first time on your MAC or for guests, you have to copy the Starter- program “WirelessMedia for MAC“...
Page 71 You can minimize the APP-window, in top menu-bar you can see if screen is mirroring or not Right click the symbol in top menu-bar to open up the context-menu. „About“: You can determine the software versions of the Base-unit, the TOUCH sensor key and ...
Page 72: Mac Os Pc/Laptop, Without Sensor-Button Touch
6.1.6 Mac OS PC/Laptop, without Sensor-button TOUCH As from firmware 3.0 you can use Klick & Show for macOS without Sensor-button TOUCH too. When you are using Klick & Show for the first time on your MAC or for guests, you have to copy the Starter- program “WirelessMedia for MAC“...
Page 73 4. Click the symbol key 'Ready to share' on the screen, window color becomes red, the screen is mirrored to the Main screen. An OSD message shows: logged in user name (optional) and whether Remote-desktop control, “Remote Control” and “Remote View”, is locked or unlocked. 5.
Page 74: Optionen Für Apple Macos, Macbook – Extended Screen
6.1.7 Optionen für Apple MacOS, MacBook – Extended screen Click the gear icon in App to open/close “options”: „Options“: Extended Screen: Transmits the Extended desktop (“Use a Separate Display”) only via AirPlay, when activated for Display on Klick & Show. Keep Aspect Ratio: keep the original aspect ratio to display on the main screen.
Page 75 Attention! When “Remote View” and “Remote Control”is unlocked, other participants can control the presentation, but also interrupt or do some consciously or unintentionally actions. Therefore, each user of a meeting can configure this setting individually at his laptop, when he is actively sharing his presentation.
Page 76: Transmitting Ios Mobile Device
6.2 Transmitting iOS mobile device 6.2.1 How to use AirPlay? AirPlay: Klick & Show supports "AirPlay" which allows the streaming of the desktop or music, (YouTube-) videos, pictures, … of your Apple device such as iPhone, iPad etc. on the main screen. (Note: iOS devices must first be connected to the Wi-Fi of Click &Show).
Page 77 Local Files: Can transmit the local file, including Photos, Video, Music to the Base-unit for playback.  File Sharing: Can store data (videos, office-files…) inside the iOS APP (prepare data before the meeting),  show data in meeting from mobile device. Data are shown via the internal media-player in Klick & Show. “Remote View”: Shows main screen at mobile device.
Page 78 4. File Sharing: Exchange data between a laptop and the mobile unit. The files are stored within the WirelessMedia App in all iOS units, which are connected to Klick & Show. Click the ?-symbol (Help) to get the IP-address in Wi-Fi of Klick & Show for the meeting. Close the window with the cross-icon. To access the files, enter the IP address by our PC/Laptop’s web browser while your PC/Laptop has connected to Klick &...
Page 79 Select the desired data, which should be shown at the main screen. Folder list File list Klick „“Remote View“ in menu bar, to control your application with mouse, or edit data with displayed keyboard of WirlessMedia App. All changes can be stored, to capture all results of a meeting. 5.
Page 80 When there is an active signal showing on the main screen, you will see it, and click the screen to control it as a mouse, as shown below. Click the Red Cross icon to return. 6. Remote Mouse: click the “Remote Mouse”-icon to generate a mouse pointer to control the Klick & Show Base-unit with 3D-movements like an air-mouse.
Page 81: Transmitting Android Device Wireless
Transmitting Android device wireless 6.3.1 “WirelessMedia” Apk for Android Open the “WirelessMedia” application: Note: permit access of photos and pictures, when installing. 2. The main interface of “WirelessMedia” is shown as below. It includes the features including: Android above 5.x Menu Bar (Functional Zone): Local Files: Can transmit the local file, including Photos, Video, Music to the receiver for playback.
Page 82 3. Local Files: select the file stored in local Android phone as shown below (Note: at the actual version the memory of internal memory card is not shown). Note: The last displayed image remains in Klick & Show memory, until the unit is turned off. To protect the privacy it is recommended to delete manually the last image, before leaving the meeting.
Page 83 4. TV Mirror: Click the icon in menu bar to shows main screen of Klick & Show on screen of Android-phone. You can control the PC/Laptop device like a remote mouse with a finger. When there is no connected Klick & Show, it shows: Operation Zone: Zone to “Remote View”...
Page 84: Hdmi Input Select
Mouse Pointer: represent the relative position of the mouse on the main screen. Re-Position: reset the positon to be the center of the screen. Back: It sends a “Return” command to the Base-unit to go back to the previous directory menu. Red Cross Icon: return to the main interface of WirelessMedia App.
Page 85 You can also switch to HDMI input at the laptop Click the cogwheel icon in App to open/close “options”, enable HDMI-Input. The Base-unit can also be configured in menu settings 5.4.5, whether it will switch manually or automatically to an active source at the HDMI-input. Note: A right-click of the mouse button returns to Home screen also.
Page 86: Firmware-Update
Firmware-Update An update of the firmware can be useful to take the advantage of new features of Klick & Show or to fix known issues and bugs. Check website www.klickandshow.com/ if there are newer versions of the firmware available. After updating the Base-unit, always check, whether the other parts still fit together or should be updated also. There are up to three different areas for updating: Firmware Base-unit, Firmware Sensor-button TOUCH and Starter-program for PC/Laptop or MAC „WirelessMedia.exe“.
Page 87: Upgrading Firmware Base-Unit
Upgrading Firmware Base-unit Download the actual firmware from https://www.klickandshow.com/ You need to unzip the file “update.bin” first and copy the updating file to the root directory of the USB drive. Connect the USB drive to either USB port of Base-unit. Note: each port can handle max.
Page 88: Upgrading And Pairing Of Sensor-Button Touch
Only when the associated “Release notes” are requiring an additional „Factory Reset“, perform it via the menu „System Update“ / „Factory Reset”. All data of configuration will be lost. So that you do not have to re-configure all data in an elaborate process, therefore note all settings within the Sub-menus before doing Factory Reset.
Page 89: Software Update Of Usb-Token
Software update of USB-token After updating of Base-unit and Sensor-buttons the supplied USB-token should be written with the actual STARTER-program for Windows, MAC and Apps for mobile-units. 1. Plug the USB-stick of Sensor-button TOUCH to an USB port of Base-unit. 2.
Page 90 Best and safest possibility: you can download the Starter-program direct from the web-browser of Base-unit. Note SSID, PASSWORD in status-line of Home screen of Base-unit. Connect your PC with the Wi-Fi of the Base-unit. Open a Browser on your PC and enter Wi-Fi-IP http://192.168.43.1:8000 see webpage of Base- unit below:...
Page 91: Clean Left Files Of Older Versions Of Starter-Program In Laptop
Clean left files of older versions of Starter-program in Laptop If you still get an error-message, when connecting the Sensor-button TOUCH, although all programs have been updated, it may possible that there are some old version “WirelessMedia” files left in the laptop, which may influence the performance of the newer “WirelessMedia”...
Page 92: Tcp/Ip Commands: Telnet
8. TCP/IP Commands: Telnet Command Tag Command Param command response effect command example switch screen to hdmi input hdmi on switch screen to home screen hdmi off hdmi #hdmi on hdmi ? query current screen is hdmi input or not list all command help help...
Page 93: Specifications Klick & Show
9. Specifications Klick & Show Klick & Show TOUCH Klick & Show K-10S / K-10L Lite Input Formats Sensor-Button Base-unit Video input format 1x USB 1x Wireless, 1x HDMI-IN Video compliance / connector USB 2.0 with type A connector IEEE 802.11n/ac, HDMI 2.0 with 19-pin female connector Video input resolution VESA, maximum 4096 x 2160* pixels HDMI 2.0, up to 4K/60Hz/4:4:4...
Page 94 Remote Viewing Remote mirroring of the main screen to mobile device 720P @ < 10 Hz via iOS/Android App Remote Mouse “Remote Control” of presenter's PC Control Operation Sensor button with tactile response Virtual buttons on OSD for USB mouse or touch display, (vibration) “Remote Control”...
Page 95: Dimensions
Dimensions Table of contents...
Page 96: Open Source-Software Provisions
"LicenseMatters.txt", which is included with the download software, to find. Within at least three (3) years after receiving the Kindermann Firmware, you and any third party may obtain a copy of the source code of the software components falling under the scope of an Open Source license.
Page 97 In the development of the Software, the following Open Source Software components have been used: Package Version License Download URL vmlinux 3.10.40 http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git busybox v1.19.2 http://www.busybox.net/ [libc] [libc] [libc] libc glibc : glibc : LGPL glibc : http://www.gnu.org/software/libc/ 2.16(ARM) cares 1.7.3 https://c-ares.haxx.se/ curl...
Page 98: Eg-Declaration
EG-declaration The full text of the EU Declaration of conformity is available at the following internet address: Hereby Kindermann GmbH declares that the radio equipment type Klick & Show is in compliance with the Directive 2014/53/EU. Klick & Show is restricted for use indoor, when operation in 5 GHz band 2.4 GHz frequency band: channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11;...
Page 99: Trouble Shooting
10. Trouble Shooting Here you can find some fundamental problems and possible causes, which can be happen during the use of Klick & Show. Find out the problem you have encountered in the table below and apply the solution. If you still have difficulty, contact your technical support, your dealer or your IT-administrator. Problem Cause Solution...
Page 100 Windows: Check in Task Manager if  Executing of *.exe file is blocked from “WirelessMediaMain.exe” is administrator or from antivirus running. software. Connect Sensor-button TOUCH to  USB, check in Device Manager, if An active anti-virus program may relevant HID drivers (mouse, HID cause the anti-virus program to block compatible device) are active.
Page 101 When plugging in the USB stick, a The USB stick was not previously In the Windows error message, click Windows error message appears. "safely removed" and simply removed. “Check and Repair” to prevent future messages. Always choose Eject Disk from the context menu of the USB drive’s icon.
Page 102 the back icon appears in the upper right corner, click on the icon. If you press the back icon on the mobile device, you'll get the same effect. The App does not work with Android Operation System Requirement Update the Android device to a newer device? Android 5 and later (Klick &...
Page 103 ceilings, under tables or in adjoining rooms. Low video performance (sharpness, “Remote View” on mobile device Lock “Remote View“ in the App of   audio and video dropouts, video consumes bandwidth and mobile unit or lock “Remote stream is jerking, …) performance and reduces speed of View”, see chapter 5.4.2 Klick &...
Page 104 Power-supply is missed. Base-unit or insert a Sensor-button and touch. Your content is removed from the Connection to Base-unit is lost. Klick & Show tries to restore the main display and the LEDs on the connection automatically. If it fails, the button are flashing.
Page 105 The WirelessMedia driver adds a new This behavior can not be changed on audio USB output device in Device the various Windows operating Manager. Audio is transferred to the systems. Klick & Show main screen via this output device. If you stop the transmission, the internal laptop speaker has no sound at Win10, at Win7 the internal speaker becomes...
Page 106 There is no sound via AirPlay or the The volume is set too low, on the Increase the volume on the mobile "WirelessMedia" App. mobile device, device. There is no sound at main-screen, Due to the limit of the Android system, On the main page of the App use the when mirroring a video by the Android doesn’t provide an interface...
Page 107 When using AirPlay the message is A firmware-update at Klick & Show Restart the MacBook / iPhone /  coming “Apple TV is searched …” was just made. iPad, or Restart Klick & Show, or  Perform a Factory Reset of Klick & ...
Page 108 Klick & Show requires a data rate between 5 and 15 Mbps. 7488000300 / 7488000305 2019-5 / 844 005 Änderungen vorbehalten / Subject to alterations Kindermann GmbH · Mainparkring 3 · D-97246 Eibelstadt · GERMANY E-Mail: info@kindermann.de · www.kindermann.com Table of contents...

This manual is also suitable for:

Klick & show k-10l lite

Kindermann Klick & Show K-10S Installation And User Manual

Quick Links

Related Manuals for Kindermann Klick & Show K-10S

Summary of Contents for Kindermann Klick & Show K-10S

This manual is also suitable for: