General Settings; Automatic Creation Of Starter-Program; Auto Standby; Airplay Screen Quality - Kindermann 7488000300 Installation And User Manual

5.3

General settings

Includes: automatic creation of Starter-program on an USB-stick, Standby, Airplay screen quality, HDMI output
resolution, individual Home-Screen, volume at display.
5.3.1
Determines, when using a USB memory at one USB-port of Base-unit, the Starter-program will be copied
automatically on USB memory. Activate or deactivate the corresponding box.
5.3.2
If the Auto Standby mode is activated, Klick & Show will automatically switch to Standby, some time after the last
Sensor-button TOUCH was plugged off, (selectable from Never to 30 minutes). In Standby, LED in POWER-key
of Base-unit is flashing and HDMI-output is switched off. When a Sensor-button TOUCH is plugged in and
connected, Standby is off.
5.3.3
Click to select the image quality when transmit apple device by "Airplay" mode, including
High: 1920x1080

Medium: 1280x720

Low: 1136x640.

Note:
Different airplay quality will occupy different data rate. Under a certain data rage, lower resolution will get better
fluency.
5.3.4
Select the resolution at HDMI output of Base-unit. System will reboot to make changes.
Existing HDMI output resolution:
3840x2160 @60Hz

Automatic creation of Starter-program

Auto Standby

Airplay screen quality

HDMI output resolution

3840x2160 @30Hz 1920x1200 @60Hz 1920x1080 @60Hz Auto
37