Parameterizing LOGO!
4.1.1 Parameters
Parameters can be:
S
The delay times of a time relay
S
The switching times (cams) of a clock
S
The threshold value of a counter
How do you recognize a parameter? Simple: by its block number. Every
parameter is identified by the block number and the parameter abbrevi-
ation. Examples:
B01:T
Block number
B01:T
A delay time can be set at block B01
B02:No1
Block B02 is a clock block. No1 is the first cam of this clock
B03:Par
Block B03 is a counter. Par is the threshold value of
the counter
4.1.2 Selecting a parameter
To select a parameter, proceed as follows:
1. Select the 'Set Param' option from the parameterization menu
Set Clock
>Set Param
2. Press OK
LOGO! displays the first parameter:
B01:T
T = 12:00m
T
= 00:00m
a
68
Parameter abbreviation
Parameter
Value set for the parameter
Current time in LOGO!
LOGO! manual
EWA 4NEB 712 6006-02