Installing Battery - CipherLab 9200 Reference Manual

INSTALLING BATTERY

For shipping and storage purposes, the mobile computer and the main battery are saved
in separate packages.
Note: Any improper handling may reduce the battery life.
Push down the clip on top of the battery cover to unlock it.
1.
Lift up and remove the battery cover.
2.
Insert the battery pack into the battery compartment at a proper angle (30°~45°)
3.
with the battery contact pins facing to the right.
Press the battery down into place. Make sure that the battery is snugly fit into the
4.
compartment.
Replace the battery cover. Fix the lower end first, then pull down the clip on top
5.
and press battery cover in until a 'click' is heard. Lock battery cover by pushing up
the clip.
Warning:
(1) Check that the clip on top of the battery cover is at the "lock" position before
powering on the device.
(2) For initial use, insert a charged battery, secure the battery cover in place, then
press the Power key to power on the mobile computer.
Quick Start
5